86690-2B500 Rear Bumper Lip for HYUNDAI Santa Fe 2009
Product: Rear Bumper Lip
Primary OE: 86690-2B500
Item code: HY02002-010
Cross-reference numbers:
86690-2B500
Brand: HYUNDAI
Model: Santa Fe
Application reference: 2009 HYUNDAI Santa Fe
Position: Rear
Verification: Do not select from appearance alone; compare the OE code, removed panel and actual bumper assembly.
Supply note: Discuss corner protection and face separation early because lower-bumper components are volume-sensitive freight.
86690-2B500 is prepared for buyers who need a clear bumper-lip reference before paint and assembly work. For 2009 HYUNDAI Santa Fe, Yongshang Auto tracks the requested rear bumper lip as HY02002-010.
HY02002-010 requires an application-specific review: A controlled review of the OE record and original-part images reduces the risk of selecting a neighbouring model-year design. This approach reduces dependence on exterior appearance alone.
Application Review Before Approval
Fitment guidance for 86690-2B500. Ask the workshop to identify every transferable component from the removed lower-bumper part. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. That comparison gives the workshop a clearer basis for a pre-paint decision.
The rear location on 2009 HYUNDAI Santa Fe should be reviewed as follows: The safest release method is VIN review, OE confirmation and trial alignment in that order. Painting should only follow after the workshop accepts the dry fit. That comparison gives the workshop a clearer basis for a pre-paint decision.
Product Technical Specifications
| Product type | Rear Bumper Lip |
|---|---|
| Primary OE reference | 86690-2B500 |
| Cross-reference numbers | 86690-2B500 |
| Internal item code | HY02002-010 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Santa Fe |
| Model year | 2009 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2009 HYUNDAI Santa Fe |
Role in Exterior Repair
Functional context for 86690-2B500. A replacement lower-bumper component allows a body shop to rebuild the exterior line without treating the part as structural reinforcement. Reinforcement bars and absorbers remain separate assembly elements. That comparison gives the workshop a clearer basis for a pre-paint decision.
Application note for item HY02002-010. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. This approach reduces dependence on exterior appearance alone.
Quality Review for the Supplied Panel
Receiving note for carton HY02002-010. Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. This evidence belongs in the same approval file as the vehicle photographs.
Pre-finish check for 2009 HYUNDAI Santa Fe. Confirm the quantity of loose covers and associated packing labels at receipt. Keep each item code linked to its carton until the fitment sample has been approved. This sequence keeps catalogue selection separate from cosmetic preparation.
B2B Sourcing and Shipment Preparation
A quotation for 86690-2B500 should reflect this guidance: Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. A dated photo record makes the decision easier to review if questions arise later.
The 3 square images attached to HY02002-010 support visual review. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. The completed check supports a traceable discussion between buyer and supplier.
Frequently Asked Questions
How is fitment assessed for OE 86690-2B500?
2009 HYUNDAI Santa Fe is the stated reference for this page. Match the complete OE code with the VIN, build date, stated application and photographs of the removed lower-bumper part. Approve the part only when those records and the visible panel geometry agree. That comparison gives the workshop a clearer basis for a pre-paint decision.
How is supplier code HY02002-010 used during purchasing?
Supplier-code context for this rear bumper lip. Provide the purchasing contact, technical contact and delivery location. Separating commercial and fitment questions can speed up approval of the order. Keep HY02002-010 beside 86690-2B500 in the final commercial record.
Which observations belong in the fitment comparison record?
Panel-comparison guidance for 2009 HYUNDAI Santa Fe. Ask the supplier to confirm the quoted item code against the submitted application evidence. Keep that approval with the purchase order. A dated photo record makes the decision easier to review if questions arise later.
What is the recommended sequence before coating the panel?
Finishing guidance for OE 86690-2B500. Keep the lower-bumper component unpainted until the OE record is accepted, incoming condition is documented and the workshop completes a non-destructive trial alignment. This review is especially useful near model-year or equipment transitions.
What evidence and commercial data support sample approval?
Wholesale request for HY02002-010. Send quantity, destination country, vehicle evidence and preferred packing method. Identify whether the request is for a sample, mixed shipment or repeat programme. This approach reduces dependence on exterior appearance alone.
Request a Quote for 86690-2B500
For repeat supply, reference the previously accepted sample or purchase order. Do not rely only on a shortened product description when multiple variants exist. For Yongshang Auto’s review, connect 86690-2B500 and HY02002-010 with the intended 2009 HYUNDAI Santa Fe, requested quantity and delivery market.
