86590-2B500 Front Bumper Lip for HYUNDAI Santa Fe 2009
Product: Front Bumper Lip
Primary OE: 86590-2B500
Item code: HY02002-009
Cross-reference numbers:
86590-2B500
Brand: HYUNDAI
Model: Santa Fe
Application reference: 2009 HYUNDAI Santa Fe
Position: Front
Verification: Approve this front cover only after the OE record, vehicle specification and mounting geometry agree.
Supply note: For wholesale review, provide quantity, consignee country, packaging instructions and the required inspection record.
86590-2B500 gives distributors a part-number-specific starting point for repair-market quotations. For 2009 HYUNDAI Santa Fe, Yongshang Auto tracks the requested front bumper lip as HY02002-009.
HY02002-009 requires an application-specific review: A correct-looking panel can still differ at the side retainers, lower fixings or trim openings, so photographic comparison remains important. The buyer can then connect the physical review to the supplier item record.
Workshop Fitment Control
Fitment guidance for 86590-2B500. Review the application in the parts catalogue and then measure or photograph the removed panel. A facelift boundary or market-specific trim grade may require a different cover. This approach reduces dependence on exterior appearance alone.
The front location on 2009 HYUNDAI Santa Fe should be reviewed as follows: Check the side retainer areas, upper fixing line and lower mounting pattern. Similar exterior styling does not guarantee that hidden attachment geometry is interchangeable. This sequence keeps catalogue selection separate from cosmetic preparation.
Product Technical Specifications
| Product type | Front Bumper Lip |
|---|---|
| Primary OE reference | 86590-2B500 |
| Cross-reference numbers | 86590-2B500 |
| Internal item code | HY02002-009 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Santa Fe |
| Model year | 2009 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2009 HYUNDAI Santa Fe |
Exterior Protection and Appearance
Functional context for 86590-2B500. the lower-bumper component interfaces with multiple surrounding parts rather than working in isolation. Grille, lamp, moulding and retainer compatibility should be reviewed as part of the repair plan. This review is especially useful near model-year or equipment transitions.
Application note for item HY02002-009. the lower-bumper component shields internal bumper components from ordinary environmental exposure while presenting the designed outer shape. It should be handled as a large finish-sensitive panel. This review is especially useful near model-year or equipment transitions.
Protecting the Panel During Finishing
Receiving note for carton HY02002-009. Allow the panel to rest in a supported position after unpacking, especially when transport packaging has constrained its shape. Compare the relaxed outline with the original before making a fit judgement. The purchase team can use the recorded result when confirming the order line.
Pre-finish check for 2009 HYUNDAI Santa Fe. Trial fit with undamaged vehicle-side hardware and avoid forcing clips into position. Excessive pressure can hide an incorrect reference or create permanent deformation. The purchase team can use the recorded result when confirming the order line.
Export Purchasing Notes
A quotation for 86590-2B500 should reflect this guidance: Request packing dimensions and gross-volume estimates before finalising freight. bumper lips and lower valances can be lightweight but consume substantial shipment space. This sequence keeps catalogue selection separate from cosmetic preparation.
The 1 square image attached to HY02002-009 support visual review. Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. This approach reduces dependence on exterior appearance alone.
Frequently Asked Questions
What is the safest way to review OE 86590-2B500?
2009 HYUNDAI Santa Fe is the stated reference for this page. Confirm that transferred accessories match the openings and attachment areas on the replacement lower-bumper component. Accessories are reviewed separately unless included in writing. A dated photo record makes the decision easier to review if questions arise later.
Why is HY02002-009 useful on a mixed body-parts order?
Supplier-code context for this front bumper lip. If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. Keep HY02002-009 beside 86590-2B500 in the final commercial record.
What geometry should be checked against the removed panel?
Panel-comparison guidance for 2009 HYUNDAI Santa Fe. Use the OE catalogue as the starting point, then compare mounting edges, equipment apertures and corner contours with the original vehicle part before paint. The buyer can then connect the physical review to the supplier item record.
Which approvals should precede sanding or drilling?
Finishing guidance for OE 86590-2B500. Complete the VIN check and dry fit first. Permanent work can make an incorrect reference difficult to return or investigate. The result should be recorded before commercial release of the requested quantity.
Which details are needed to quote OE 86590-2B500 for wholesale supply?
Wholesale request for HY02002-009. Attach clear vehicle and old-cover images, then list quantity and delivery conditions. This supports both technical review and a traceable commercial response. This evidence belongs in the same approval file as the vehicle photographs.
Request a Quote for 86590-2B500
Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. For Yongshang Auto’s review, connect 86590-2B500 and HY02002-009 with the intended 2009 HYUNDAI Santa Fe, requested quantity and delivery market.
