71511-TBX-H00 Rear Bumper Lower Garnish for HONDA Inspire 2019
Product: Rear Bumper Lower Garnish
Primary OE: 71511-TBX-H00
Item code: HD02002-008
Cross-reference numbers:
71511-TBX-H00
Brand: HONDA
Model: Inspire
Application reference: 2019 HONDA Inspire
Position: Rear
Verification: Match 71511-TBX-H00 with the VIN, build date, panel outline and equipment openings before refinishing.
Supply note: Keep 71511-TBX-H00 and HD02002-008 on the enquiry, purchase order and packing confirmation.
71511-TBX-H00 forms a practical reference for replacement work involving panel alignment and trim interfaces. For 2019 HONDA Inspire, Yongshang Auto tracks the requested rear bumper lower garnish as HD02002-008.
HD02002-008 requires an application-specific review: A controlled review of the OE record and original-part images reduces the risk of selecting a neighbouring model-year design. This evidence belongs in the same approval file as the vehicle photographs.
Application Review Before Approval
Fitment guidance for 71511-TBX-H00. Check production transitions carefully when the stated year sits near a facelift. Catalogue month ranges can be more reliable than a registration year alone. The purchase team can use the recorded result when confirming the order line.
The rear location on 2019 HONDA Inspire should be reviewed as follows: Review the application in the parts catalogue and then measure or photograph the removed panel. A facelift boundary or market-specific trim grade may require a different cover. This evidence belongs in the same approval file as the vehicle photographs.
Product Technical Specifications
| Product type | Rear Bumper Lower Garnish |
|---|---|
| Primary OE reference | 71511-TBX-H00 |
| Cross-reference numbers | 71511-TBX-H00 |
| Internal item code | HD02002-008 |
| Vehicle brand | HONDA |
| Vehicle model | Inspire |
| Model year | 2019 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2019 HONDA Inspire |
Restoring the Vehicle Body Line
Functional context for 71511-TBX-H00. A replacement lower-bumper component allows a body shop to rebuild the exterior line without treating the part as structural reinforcement. Reinforcement bars and absorbers remain separate assembly elements. The completed check supports a traceable discussion between buyer and supplier.
Application note for item HD02002-008. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. This sequence keeps catalogue selection separate from cosmetic preparation.
Quality Review for the Supplied Panel
Receiving note for carton HD02002-008. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. This sequence keeps catalogue selection separate from cosmetic preparation.
Pre-finish check for 2019 HONDA Inspire. Do not judge the panel while it is twisted on the floor or leaning against a sharp edge. Support it near its designed mounting orientation before checking contour. This review is especially useful near model-year or equipment transitions.
Preparing a B2B bumper lip Enquiry
A quotation for 71511-TBX-H00 should reflect this guidance: When purchasing for distribution, list the target model years and sales markets. That context helps identify catalogue transitions that deserve additional verification. The buyer can then connect the physical review to the supplier item record.
The 2 square images attached to HD02002-008 support visual review. Discuss corner protection, face separation and keep-flat handling marks before production packing. Large exterior panels need protection from both abrasion and concentrated pressure. That comparison gives the workshop a clearer basis for a pre-paint decision.
Frequently Asked Questions
What confirms the application of OE 71511-TBX-H00?
2019 HONDA Inspire is the stated reference for this page. Match the complete OE code with the VIN, build date, stated application and photographs of the removed lower-bumper part. Approve the part only when those records and the visible panel geometry agree. The repairer should document the outcome before transferring trim components.
How should a distributor quote reference HD02002-008?
Supplier-code context for this rear bumper lower garnish. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. Keep HD02002-008 beside 71511-TBX-H00 in the final commercial record.
How can the repairer review the lower-bumper component beyond its front-facing appearance?
Panel-comparison guidance for 2019 HONDA Inspire. Ask the supplier to confirm the quoted item code against the submitted application evidence. Keep that approval with the purchase order. This sequence keeps catalogue selection separate from cosmetic preparation.
What must happen before paint is applied to 71511-TBX-H00?
Finishing guidance for OE 71511-TBX-H00. The workshop should accept contour, attachment points and accessory interfaces before primer, paint, drilling or trimming begins. A dated photo record makes the decision easier to review if questions arise later.
Which order data helps Yongshang Auto review 71511-TBX-H00?
Wholesale request for HD02002-008. Reference the exact application together with packaging limits and the intended sales market. These details help separate fitment review from freight planning. The buyer can then connect the physical review to the supplier item record.
Request a Quote for 71511-TBX-H00
Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. For Yongshang Auto’s review, connect 71511-TBX-H00 and HD02002-008 with the intended 2019 HONDA Inspire, requested quantity and delivery market.
