71106-TW1-H02 Front Bumper Lip for HONDA Crosstour 2014
Product: Front Bumper Lip
Primary OE: 71106-TW1-H02
Item code: HD02002-013
Cross-reference numbers:
71106-TW1-H02
Brand: HONDA
Model: Crosstour
Application reference: 2014 HONDA Crosstour
Position: Front
Verification: Validate 2014 HONDA Crosstour through OE data, production date, original-part photographs and a dry vehicle fit.
Supply note: For wholesale review, provide quantity, consignee country, packaging instructions and the required inspection record.
71106-TW1-H02 is documented for wholesale enquiries in which OE traceability and application evidence are required. For 2014 HONDA Crosstour, Yongshang Auto tracks the requested front bumper lip as HD02002-013.
HD02002-013 requires an application-specific review: Before paint preparation, workshops should dry-check the outline and verify that every required opening matches the vehicle equipment. The result should be recorded before commercial release of the requested quantity.
Generation and Equipment Verification
Fitment guidance for 71106-TW1-H02. If the original cover is missing, provide VIN data and clear photographs of the uncovered vehicle structure. The supplier may need additional evidence before confirming the reference. This evidence belongs in the same approval file as the vehicle photographs.
The front location on 2014 HONDA Crosstour should be reviewed as follows: Verify whether the request is for the upper cover, lower cover or complete outer lower-bumper component. The purchase description should match the physical section needed by the repair. A dated photo record makes the decision easier to review if questions arise later.
Product Technical Specifications
| Product type | Front Bumper Lip |
|---|---|
| Primary OE reference | 71106-TW1-H02 |
| Cross-reference numbers | 71106-TW1-H02 |
| Internal item code | HD02002-013 |
| Vehicle brand | HONDA |
| Vehicle model | Crosstour |
| Model year | 2014 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2014 HONDA Crosstour |
Collision-Repair Application
Functional context for 71106-TW1-H02. A well-matched cover supports consistent body lines and easier transfer of compatible trim parts. The vehicle-side support hardware must also remain correctly positioned. The buyer can then connect the physical review to the supplier item record.
Application note for item HD02002-013. A well-matched cover supports consistent body lines and easier transfer of compatible trim parts. The vehicle-side support hardware must also remain correctly positioned. The same information helps receiving staff identify the correct carton and panel.
Handling the lower-bumper component Before Installation
Receiving note for carton HD02002-013. Complete a dry installation using the intended retainers and brackets. Review panel gaps and equipment openings before applying primer, paint or adhesive accessories. A dated photo record makes the decision easier to review if questions arise later.
Pre-finish check for 2014 HONDA Crosstour. Allow the panel to rest in a supported position after unpacking, especially when transport packaging has constrained its shape. Compare the relaxed outline with the original before making a fit judgement. The same information helps receiving staff identify the correct carton and panel.
Information for Distributors and Importers
A quotation for 71106-TW1-H02 should reflect this guidance: If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. This review is especially useful near model-year or equipment transitions.
The 3 square images attached to HD02002-013 support visual review. Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. This sequence keeps catalogue selection separate from cosmetic preparation.
Frequently Asked Questions
How should a buyer confirm OE 71106-TW1-H02?
2014 HONDA Crosstour is the stated reference for this page. Check whether the repair needs a complete lower-bumper component, upper cover or lower cover. Section identity is part of the fitment decision. This approach reduces dependence on exterior appearance alone.
What is the purpose of keeping HD02002-013 beside OE 71106-TW1-H02?
Supplier-code context for this front bumper lip. Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. Keep HD02002-013 beside 71106-TW1-H02 in the final commercial record.
Which adjacent components help confirm the panel profile?
Panel-comparison guidance for 2014 HONDA Crosstour. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. This approach reduces dependence on exterior appearance alone.
Why should the panel remain unpainted during fitment review?
Finishing guidance for OE 71106-TW1-H02. Complete the VIN check and dry fit first. Permanent work can make an incorrect reference difficult to return or investigate. The repairer should document the outcome before transferring trim components.
What should the buyer confirm before a repeat order is released?
Wholesale request for HD02002-013. Attach clear vehicle and old-cover images, then list quantity and delivery conditions. This supports both technical review and a traceable commercial response. That comparison gives the workshop a clearer basis for a pre-paint decision.
Request a Quote for 71106-TW1-H02
When purchasing for distribution, list the target model years and sales markets. That context helps identify catalogue transitions that deserve additional verification. For Yongshang Auto’s review, connect 71106-TW1-H02 and HD02002-013 with the intended 2014 HONDA Crosstour, requested quantity and delivery market.
