71110-TA0-A00 Front Bumper Lower Protector for HONDA Accord 2008
Product: Front Bumper Lower Protector
Primary OE: 71110-TA0-A00
Item code: HD02002-001
Cross-reference numbers:
71110-TA0-A00
Brand: HONDA
Model: Accord
Application reference: 2008 HONDA Accord
Position: Front
Verification: Verify the full application record and complete a non-destructive trial fit before sanding, drilling or painting.
Supply note: Identify sample or bulk demand and include the destination so shipment volume and protection can be evaluated.
71110-TA0-A00 is supplied as a sourcing reference for repair programmes that separate fitment approval from finishing. For 2008 HONDA Accord, Yongshang Auto tracks the requested front bumper lower protector as HD02002-001.
HD02002-001 requires an application-specific review: The quotation should state whether the request concerns a complete lower-bumper component, an upper section or a lower section to avoid an incorrect comparison. This review is especially useful near model-year or equipment transitions.
Compatibility Review for This Reference
Fitment guidance for 71110-TA0-A00. Send close views of sensor seats, tow-eye covers and lamp apertures. Their location and shape often provide faster confirmation than exterior colour or finish. The completed check supports a traceable discussion between buyer and supplier.
The front location on 2008 HONDA Accord should be reviewed as follows: Ask the workshop to identify every transferable component from the removed lower-bumper part. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. The buyer can then connect the physical review to the supplier item record.
Product Technical Specifications
| Product type | Front Bumper Lower Protector |
|---|---|
| Primary OE reference | 71110-TA0-A00 |
| Cross-reference numbers | 71110-TA0-A00 |
| Internal item code | HD02002-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2008 HONDA Accord |
How the lower-bumper component Completes the Bumper System
Functional context for 71110-TA0-A00. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. The repairer should document the outcome before transferring trim components.
Application note for item HD02002-001. The outer lower-bumper component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. A dated photo record makes the decision easier to review if questions arise later.
Surface Review Before Refinishing
Receiving note for carton HD02002-001. Do not judge the panel while it is twisted on the floor or leaning against a sharp edge. Support it near its designed mounting orientation before checking contour. The same information helps receiving staff identify the correct carton and panel.
Pre-finish check for 2008 HONDA Accord. On receipt, remove the lower-bumper component without dragging it across staples or rough carton edges. Inspect both corners, all tabs and the broad visible face under even lighting. This evidence belongs in the same approval file as the vehicle photographs.
Sample Approval and Quantity Planning
A quotation for 71110-TA0-A00 should reflect this guidance: Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. The repairer should document the outcome before transferring trim components.
The 2 square images attached to HD02002-001 support visual review. Request packing dimensions and gross-volume estimates before finalising freight. bumper lips and lower valances can be lightweight but consume substantial shipment space. This evidence belongs in the same approval file as the vehicle photographs.
Frequently Asked Questions
Which comparison points matter for OE 71110-TA0-A00?
2008 HONDA Accord is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. Those observations should remain available during sample and bulk-order review.
Where should buyers record item number HD02002-001?
Supplier-code context for this front bumper lower protector. Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. Keep HD02002-001 beside 71110-TA0-A00 in the final commercial record.
Which physical areas require comparison on this front cover?
Panel-comparison guidance for 2008 HONDA Accord. Request a full photographic record of the removed lower-bumper part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. This evidence belongs in the same approval file as the vehicle photographs.
At what stage should refinishing begin for 2008 HONDA Accord?
Finishing guidance for OE 71110-TA0-A00. Resolve damaged brackets or uncertain equipment openings first; coating the part should be the last step in the approval sequence. This evidence belongs in the same approval file as the vehicle photographs.
Which facts allow packaging and freight planning to begin?
Wholesale request for HD02002-001. Confirm whether loose accessories are expected and specify carton marks, corner protection and pre-shipment photograph requirements. This sequence keeps catalogue selection separate from cosmetic preparation.
Request a Quote for 71110-TA0-A00
Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. For Yongshang Auto’s review, connect 71110-TA0-A00 and HD02002-001 with the intended 2008 HONDA Accord, requested quantity and delivery market.
