52119-0R090 Front Bumper Cover for 2012 TOYOTA RAV4
Product: Front Bumper Cover
Primary OE: 52119-0R090
Item code: TY02001-005
Cross-reference numbers:
52119-0R090
Brand: TOYOTA
Model: RAV4
Application reference: 2012 TOYOTA RAV4
Position: Front
Verification: Verify the full application record and complete a non-destructive trial fit before sanding, drilling or painting.
Supply note: Identify sample or bulk demand and include the destination so shipment volume and protection can be evaluated.
52119-0R090 is supplied as a sourcing reference for repair programmes that separate fitment approval from finishing. For 2012 TOYOTA RAV4, Yongshang Auto tracks the requested front bumper cover as TY02001-005.
TY02001-005 requires an application-specific review: The quotation should state whether the request concerns a complete cover, an upper section or a lower section to avoid an incorrect comparison. This review is especially useful near model-year or equipment transitions.
Compatibility Review for This Reference
Fitment guidance for 52119-0R090. Send close views of sensor seats, tow-eye covers and lamp apertures. Their location and shape often provide faster confirmation than exterior colour or finish. The completed check supports a traceable discussion between buyer and supplier.
The front location on 2012 TOYOTA RAV4 should be reviewed as follows: Ask the workshop to identify every transferable component from the old cover. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. The buyer can then connect the physical review to the supplier item record.
Product Technical Specifications
| Product type | Front Bumper Cover |
|---|---|
| Primary OE reference | 52119-0R090 |
| Internal item code | TY02001-005 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Application reference | 2012 TOYOTA RAV4 |
| Installation position | Front |
| Cross-reference numbers | 52119-0R090 |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
How the Cover Completes the Bumper System
Functional context for 52119-0R090. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. The repairer should document the outcome before transferring trim components.
Application note for item TY02001-005. The outer cover contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. A dated photo record makes the decision easier to review if questions arise later.
Surface Review Before Refinishing
Receiving note for carton TY02001-005. Do not judge the panel while it is twisted on the floor or leaning against a sharp edge. Support it near its designed mounting orientation before checking contour. The same information helps receiving staff identify the correct carton and panel.
Pre-finish check for 2012 TOYOTA RAV4. On receipt, remove the cover without dragging it across staples or rough carton edges. Inspect both corners, all tabs and the broad visible face under even lighting. This evidence belongs in the same approval file as the vehicle photographs.
Sample Approval and Quantity Planning
A quotation for 52119-0R090 should reflect this guidance: Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. The repairer should document the outcome before transferring trim components.
The 2 square images attached to TY02001-005 support visual review. Request packing dimensions and gross-volume estimates before finalising freight. Bumper covers can be lightweight but consume substantial shipment space. This evidence belongs in the same approval file as the vehicle photographs.
Frequently Asked Questions
Which comparison points matter for OE 52119-0R090?
2012 TOYOTA RAV4 is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. Those observations should remain available during sample and bulk-order review.
Where should buyers record item number TY02001-005?
Supplier-code context for this front bumper cover. Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. Keep TY02001-005 beside 52119-0R090 in the final commercial record.
Which physical areas require comparison on this front cover?
Panel-comparison guidance for 2012 TOYOTA RAV4. Request a full photographic record of the old cover and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. This evidence belongs in the same approval file as the vehicle photographs.
At what stage should refinishing begin for 2012 TOYOTA RAV4?
Finishing guidance for OE 52119-0R090. Resolve damaged brackets or uncertain equipment openings first; coating the part should be the last step in the approval sequence. This evidence belongs in the same approval file as the vehicle photographs.
Which facts allow packaging and freight planning to begin?
Wholesale request for TY02001-005. Confirm whether loose accessories are expected and specify carton marks, corner protection and pre-shipment photograph requirements. This sequence keeps catalogue selection separate from cosmetic preparation.
Request a Quote for 52119-0R090
Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. For Yongshang Auto’s review, connect 52119-0R090 and TY02001-005 with the intended 2012 TOYOTA RAV4, requested quantity and delivery market.
