PEB102470L Automotive Water Pump for BMW
Product: Automotive Water Pump
Primary OE: PEB102470L
Item code: BM01017-022
Cross-reference numbers:
PEB102470L
PEB102440
GWP2604
PEB102440L
Brand: BMW
Application reference: BMW OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Sample approval is recommended before a production order.
PEB102470L is presented as a vehicle-specific coolant-circulation component. This BMW record identifies SKU BM01017022 through OE evidence. Buyers can therefore separate PEB102470L from similar-looking pumps.
Application approval for PEB102470L should combine the parts catalogue, VIN and removed component. No single dependable model is published for PEB102470L, so the Model filter remains blank for SKU BM01017022.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | PEB102470L |
| Internal item code | BM01017-022 |
| Vehicle brand | BMW |
| Model filter | Not specified; verify by VIN and original part |
| Cross-reference numbers | PEB102470L / PEB102440 / GWP2604 / PEB102440L |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Circulation Performance in Service
PEB102470L belongs in the undefined coolant-circulation path. Its task is to move heat-laden coolant toward the radiator while the engine is running.
For the undefined application, PEB102470L is the mechanical link that keeps coolant travelling through the engine and heat exchanger. Consistent circulation helps the system control operating temperature.
Wholesale Identification and Traceability
Purchasing teams should put BM01017022 on the enquiry and retain PEB102470L on approval records. State the BMW application evidence, target quantity and labelling requirements.
To price PEB102470L, provide the BMW vehicle evidence, order volume and destination port. Reference BM01017022 for traceable communication from sample to shipment.
Pre-Purchase Pump Confirmation
A reliable BMW match starts with PEB102470L and ends with physical comparison. Use the VIN and engine code to decide whether BM01017022 has the correct configuration.
Screen PEB102470L through the BMW application catalogue and verify the vehicle’s production information. Treat BM01017022 as an internal traceability code, not a substitute for VIN confirmation.
No dependable single model was available for PEB102470L, so the Model filter remains empty instead of publishing an assumption.
Connection Layout Before Installation
Place the original unit and BM01017022 in the same orientation. Verify that PEB102470L shares the same flange plane, ports, drive interface and sealing profile.
Check PEB102470L for the correct impeller side, bearing hub and housing geometry. On BM01017022, even a small offset at the gasket surface can prevent a dependable seal.
Cooling-System Commissioning
Do not install PEB102470L into a dirty circuit. Examine BM01017022, renew approved sealing parts and verify free rotation before the engine is started.
Handle BM01017022 by its housing and protect the gasket face. Follow the specified tightening sequence for PEB102470L, refill slowly and confirm heater circulation during bleeding.
Buyer Questions About This Water Pump
What does PEB102470L do in the cooling system?
OE PEB102470L identifies an engine water pump. In the BMW vehicle cooling circuit, PEB102470L circulates coolant between heat-generating and heat-rejecting components.
Which catalogue checks apply to PEB102470L?
Approve PEB102470L with VIN and catalogue data. Match SKU BM01017022 against the removed pump. Production changes can alter PEB102470L mounting or drive details.
Which physical details should match on PEB102470L?
Compare the PEB102470L housing, flange, ports, hub or pulley, impeller side and sealing face. Use the BM01017022 gallery for orientation. Measure PEB102470L before installation.
Which symptoms justify checking PEB102470L?
Inspect PEB102470L after coolant leakage, bearing noise, overheating or unstable circulation. During BM01017022 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume PEB102470L is the only cause.
Which details are needed to price PEB102470L?
Request PEB102470L pricing with item code BM01017022. Add quantity, destination and packaging instructions. Send original-part evidence when PEB102470L needs application review.
Arrange Sample Review for PEB102470L
Send PEB102470L quantity and destination to Yongshang Auto. Identify the request with SKU BM01017022. Add packing details and original-pump evidence when PEB102470L needs application review.
Compatibility reminder: PEB102470L identifies the reference, not guaranteed fitment. Confirm SKU BM01017022 through VIN, engine data and removed-pump comparison.
