03C121008E Automotive Water Pump for AUDI
Product: Automotive Water Pump
Primary OE: 03C121008E
Item code: AD01017-035
Cross-reference numbers:
03C121008E
03C121005N
03C121005NX
03C121005R
03C121005RX
03C121008B
03C121008BX
03C121008EX
03C121008H
03C121008HX
Brand: AUDI
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Sample approval is recommended before a production order.
03C121008E is intended for sample approval and wholesale ordering. This AUDI record identifies SKU AD01017035 through OE evidence. Buyers can therefore separate 03C121008E from similar-looking pumps.
Application approval for 03C121008E should combine the parts catalogue, VIN and removed component. No single dependable model is published for 03C121008E, so the Model filter remains blank for SKU AD01017035.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 03C121008E |
| Internal item code | AD01017-035 |
| Vehicle brand | AUDI |
| Model filter | Not specified; verify by VIN and original part |
| Cross-reference numbers | 03C121008E / 03C121005N / 03C121005NX / 03C121005R / 03C121005RX / 03C121008B / 03C121008BX / 03C121008EX / 03C121008H / 03C121008HX |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Commercial Sourcing Requirements
Purchasing teams should put AD01017035 on the enquiry and retain 03C121008E on approval records. State the AUDI application evidence, target quantity and labelling requirements.
To price 03C121008E, provide the AUDI vehicle evidence, order volume and destination port. Reference AD01017035 for traceable communication from sample to shipment.
Visual Identification Points
Place the original unit and AD01017035 in the same orientation. Verify that 03C121008E shares the same flange plane, ports, drive interface and sealing profile.
Check 03C121008E for the correct impeller side, bearing hub and housing geometry. On AD01017035, even a small offset at the gasket surface can prevent a dependable seal.
Water Pump Function Across Driving Cycles
03C121008E belongs in the undefined coolant-circulation path. Its task is to move heat-laden coolant toward the radiator while the engine is running.
For the undefined application, 03C121008E is the mechanical link that keeps coolant travelling through the engine and heat exchanger. Consistent circulation helps the system control operating temperature.
Cooling-System Cleanliness Requirements
Do not install 03C121008E into a dirty circuit. Examine AD01017035, renew approved sealing parts and verify free rotation before the engine is started.
Handle AD01017035 by its housing and protect the gasket face. Follow the specified tightening sequence for 03C121008E, refill slowly and confirm heater circulation during bleeding.
Matching the Pump to the Vehicle
A reliable AUDI match starts with 03C121008E and ends with physical comparison. Use the VIN and engine code to decide whether AD01017035 has the correct configuration.
Screen 03C121008E through the AUDI application catalogue and verify the vehicle’s production information. Treat AD01017035 as an internal traceability code, not a substitute for VIN confirmation.
No dependable single model was available for 03C121008E, so the Model filter remains empty instead of publishing an assumption.
Application and Ordering FAQ
What does 03C121008E do in the cooling system?
OE 03C121008E identifies an engine water pump. In the AUDI vehicle cooling circuit, 03C121008E circulates coolant between heat-generating and heat-rejecting components.
Which evidence is required to approve 03C121008E?
Approve 03C121008E with VIN and catalogue data. Match SKU AD01017035 against the removed pump. Production changes can alter 03C121008E mounting or drive details.
Which physical details should match on 03C121008E?
Compare the 03C121008E housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017035 gallery for orientation. Measure 03C121008E before installation.
Which leakage signs should be checked around 03C121008E?
Inspect 03C121008E after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017035 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 03C121008E is the only cause.
How can an importer request a quote for 03C121008E?
Request 03C121008E pricing with item code AD01017035. Add quantity, destination and packaging instructions. Send original-part evidence when 03C121008E needs application review.
Contact Yongshang Auto About 03C121008E
Send 03C121008E quantity and destination to Yongshang Auto. Identify the request with SKU AD01017035. Add packing details and original-pump evidence when 03C121008E needs application review.
Compatibility reminder: 03C121008E identifies the reference, not guaranteed fitment. Confirm SKU AD01017035 through VIN, engine data and removed-pump comparison.
