030121008C Automotive Water Pump for AUDI
Product: Automotive Water Pump
Primary OE: 030121008C
Item code: AD01017-023
Cross-reference numbers:
030121008C
030121008A
030121005S
030121008AV
030121008AX
030121005A
030121008CX
Brand: AUDI
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Mixed-model consolidation can be discussed for export shipments.
030121008C is recorded for direct comparison with the removed pump. This AUDI record identifies SKU AD01017023 through OE evidence. Buyers can therefore separate 030121008C from similar-looking pumps.
Application approval for 030121008C should combine the parts catalogue, VIN and removed component. No single dependable model is published for 030121008C, so the Model filter remains blank for SKU AD01017023.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 030121008C |
| Internal item code | AD01017-023 |
| Vehicle brand | AUDI |
| Model filter | Not specified; verify by VIN and original part |
| Cross-reference numbers | 030121008C / 030121008A / 030121005S / 030121008AV / 030121008AX / 030121005A / 030121008CX |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Critical Fitment Dimensions
Review the 3 square AD01017023 views for connector, pulley and casing orientation. Final acceptance of 030121008C should include a ruler or fixture check against the old pump.
The practical comparison for AD01017023 includes fastener positions, hose connections and installed clearance. Match all visible features of 030121008C before transferring any hardware.
Part-Number Validation Process
For AD01017023, review the complete AUDI OE chain around 030121008C. Superseded numbers may identify the same service family, but mounting and drive details still require confirmation.
Confirm AD01017023 against the removed AUDI unit rather than relying on appearance alone. Reference 030121008C, the build date and catalogue remarks should agree before ordering.
No dependable single model was available for 030121008C, so the Model filter remains empty instead of publishing an assumption.
Engine Temperature Management
030121008C is catalogued for an undefined thermal-management application. The pump creates the circulation needed to carry engine heat into the radiator air stream.
030121008C provides circulation for the undefined engine-cooling network. Its output must remain steady as engine speed and thermal load change.
International Order Preparation
For export supply of 030121008C, identify AD01017023 and specify carton, label and inspection expectations. A AUDI sample can be reviewed before the production batch is released.
Importers sourcing 030121008C can identify the item internally as AD01017023. Add annual demand, packaging preference and delivery terms so the AUDI quotation is comparable.
Installation Quality-Control Priorities
Keep AD01017023 clean and capped until installation. Fit 030121008C with the specified seal, torque pattern and coolant procedure, then bleed trapped air from the system.
Before fitting 030121008C, flush contaminated coolant and inspect belts, pulleys and hoses. After AD01017023 is installed, check for leakage at both cold and operating temperature.
Compatibility and Supply FAQ
What does 030121008C do in the cooling system?
OE 030121008C identifies an engine water pump. In the AUDI vehicle cooling circuit, 030121008C circulates coolant between heat-generating and heat-rejecting components.
How should a distributor screen 030121008C?
Approve 030121008C with VIN and catalogue data. Match SKU AD01017023 against the removed pump. Production changes can alter 030121008C mounting or drive details.
Which physical details should match on 030121008C?
Compare the 030121008C housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017023 gallery for orientation. Measure 030121008C before installation.
How can a failing pump be identified at 030121008C?
Inspect 030121008C after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017023 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 030121008C is the only cause.
What information speeds up sourcing of 030121008C?
Request 030121008C pricing with item code AD01017023. Add quantity, destination and packaging instructions. Send original-part evidence when 030121008C needs application review.
Confirm 030121008C Before Ordering
Send 030121008C quantity and destination to Yongshang Auto. Identify the request with SKU AD01017023. Add packing details and original-pump evidence when 030121008C needs application review.
Ordering safeguard: 030121008C identifies the reference, not guaranteed fitment. Confirm SKU AD01017023 through VIN, engine data and removed-pump comparison.
