6132000022 Viscous Fan Clutch Assembly for MERCEDES-BENZ E-Class W210
Product: Viscous Fan Clutch Assembly
Primary OE: 6132000022
Item code: BZ01012-018
Cross-reference numbers:
No additional interchange number is listed in the source record.
Brand: MERCEDES-BENZ
Model: E-Class W210
Function: Uses viscous coupling action to balance cooling airflow and engine drag.
Supply: Supports sample, batch and recurring cooling-system requirements.
Fitment check: Confirm model, engine, production period and both mounting interfaces.
Quality note: Visible housing, flange and thread condition may be included in the QC scope.
6132000022 Viscous Fan Clutch Assembly for MERCEDES-BENZ E-Class W210
Designed for comparison with the original MERCEDES-BENZ E-Class W210 cooling-fan drive, this assembly is indexed by 6132000022. Catalogue code BZ01012-018 keeps its mounting and hub details traceable.
Cooling performance depends on both airflow and mechanical integrity. The clutch bearing, input connection, fan bolt pattern and thermal valve must suit the original system.
Product Technical Specifications
| Component | Viscous fan clutch assembly |
|---|---|
| Primary OE reference | 6132000022 |
| Cross-reference numbers | No additional reference listed |
| Vehicle brand | MERCEDES-BENZ |
| Model reference | E-Class W210 |
| Yongshang Auto SKU | BZ01012-018 |
| Supply position | Aftermarket wholesale replacement |
How the Viscous Coupling Works
This assembly helps balance low-speed cooling airflow and engine efficiency. A sound bearing, correct hub offset and properly calibrated viscous action are all important to reliable operation.
Inspect for cracked blades, loose fasteners, shaft play and contact marks before replacing the hub. A damaged fan can overload a new clutch and create a safety risk.
Mechanical Fitment Checklist
Cross-check 6132000022, the MERCEDES-BENZ E-Class W210 production period and the fan-blade interface. Do not force a mismatched hub or reuse damaged mounting hardware.
- Confirm the OE number and usable cross-references.
- Match vehicle model, engine, chassis and production period.
- Check drive-side thread or flange and rotation direction.
- Measure hub height, pilot diameter and fan bolt circle.
- Verify blade alignment and clearance inside the shroud.
Classic Vehicle Fitment Notes
Older MERCEDES-BENZ E-Class W210 vehicles may have replacement water pumps, converted fans or non-original hardware. Compare the installed thread, flange, bolt pattern and hub offset directly instead of assuming the current cooling-fan drive still matches the factory configuration.
Installation and Cooling-System Checks
Installation should be completed by a qualified technician. Follow the specified thread direction and torque procedure, inspect the fan and water-pump bearing, replace damaged hardware, and confirm that the blade rotates freely without contacting the radiator or shroud. Test the vehicle under the appropriate warm operating conditions after assembly.
Quality-Control Options
Order checks can include part-number traceability, obvious handling damage, thread or flange condition and secure carton protection.
Ordering Specification Notes
To reduce selection risk, treat 6132000022 and BZ01012-018 as the start of the MERCEDES-BENZ E-Class W210 specification. Add thread or flange details, pilot diameter, bolt pattern, hub offset and shroud clearance. The resulting checklist supports quotation, approval, receiving and installation review.
Wholesale and Procurement Information
To review supply for 6132000022, submit BZ01012-018 with the engine application, expected quantity and acceptance criteria. This keeps technical and commercial details connected.
Frequently Asked Questions
Why can a worn 6132000022 clutch affect cooling?
Insufficient engagement may reduce fan airflow at low vehicle speed, especially under high thermal load.
Does constant fan noise always mean clutch failure?
No. Diagnosis should also consider engine temperature, shroud condition, belt drive and the vehicle’s normal control strategy.
Is professional installation recommended?
Yes. The technician should follow the correct thread direction, torque procedure and fan-clearance checks.
Can SKU BZ01012-018 be included in a mixed order?
Yes. List each SKU, OE number and quantity separately so labels and inspection records remain traceable.
What should an importer include in an enquiry?
Send the engine application, required volume, destination, original-part photos and commercial packing requirements.
Request a 6132000022 Fan Clutch Quote
Contact Yongshang Auto with 6132000022, BZ01012-018, quantity and destination country for a fitment review and wholesale proposal for MERCEDES-BENZ E-Class W210.
Fitment notice: OE and model references support identification but do not replace engine-specific catalogue checks or comparison with the original fan clutch.
