F1EZ-13008-GT Head Light for FORD Focus 2015 Left
Primary OE reference: F1EZ-13008-GT
Cross-reference number 1: F1EZ-13008-GT
Product type: Head Light Assembly
Applicable vehicle: FORD Focus 2015
Installation position: Left front headlamp position
Brand: FORD
Model: Focus
Vehicle year: 2015
Lighting configuration: version with integrated daytime running light
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a different rear casing or bracket offset.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the left FORD Focus application with version with integrated daytime running light, establish whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference F1EZ-13008-GT for FORD Focus 2015, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the Focus application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | F1EZ-13008-GT |
| Cross-reference numbers | F1EZ-13008-GT |
| Internal item code | FD04001-075 |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | 2015 |
| Installation position | Left front |
| Lighting configuration | version with integrated daytime running light |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left FORD Focus headlamp, the version with integrated daytime running light specification should be assessed together with the 2015 body application. Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
The left Focus lighting package should remain the reference during electrical review. Establish compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the FORD Focus unit at the left front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Frequently Asked Questions
What information supports a wholesale quotation?
State the FORD Focus application, production year, left side, lighting version, quantity and delivery country.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
How can connector compatibility be reviewed?
Compare keying, terminal count, latch direction and wire exit, then establish any required ballast, driver or levelling motor.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
