8W0 941 006 Head Light for AUDI A4 2016 Right
Primary OE reference: 8W0 941 006
Cross-reference number 1: 8W0 941 006
Product type: Head Light Assembly
Applicable vehicle: AUDI A4 2016
Installation position: Right front headlamp position
Brand: AUDI
Model: A4
Vehicle year: 2016
Lighting configuration: xenon lighting
Housing comparison: Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Evaluate every plug and socket with the original unit and establish whether the levelling motor, ballast or LED driver is included or transferred.
Mounting points: Review mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right AUDI A4 application with xenon lighting, verify that the beam system and observable lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 8W0 941 006 for AUDI A4 2016, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the A4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Use the original assembly to review the shell profile, upper support shape and clearance around adjacent trim before installation.
Review mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 8W0 941 006 |
| Cross-reference numbers | 8W0 941 006 |
| Internal item code | AD04001-012 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2016 |
| Installation position | Right front |
| Lighting configuration | xenon lighting |
Wholesale Supply and Protective Packing
For repeat orders, preserve the approved product photographs and application record so the same optical and mounting version is requested.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right AUDI A4 headlamp, the xenon lighting specification should be assessed together with the 2016 body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
The right A4 lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the AUDI A4 unit at the right front position, preserve even body gaps and the intended beam orientation. Use appropriate workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
What information supports a wholesale quotation?
State the AUDI A4 application, production year, right side, lighting version, quantity and delivery country.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also align with the optical system, electrical interface, mounting features and market specification.
What should be checked before installation?
For the A4, look over the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
