92101-A7000 Head Light for KIA K3 2013 Left
Primary OE reference: 92101-A7000
Cross-reference number 1: 92101-A7000
Product type: Head Light Assembly
Applicable vehicle: KIA K3 2013
Installation position: Left front headlamp position
Brand: KIA
Model: K3
Vehicle year: 2013
Lighting configuration: China-market specification
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.
Optical system: Inspect the lens pattern, internal bezel finish and optical modules so the specified unit matches the intended lighting package.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Transfer only undamaged reusable hardware, validate the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the left KIA K3 application with china-market specification, verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-A7000 for KIA K3 2013, with the left position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Look over the lens pattern, internal bezel finish and optical modules so the selected unit matches the intended lighting package.
For the K3 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-A7000 |
| Cross-reference numbers | 92101-A7000 |
| Internal item code | KA04001-197 |
| Vehicle brand | KIA |
| Vehicle model | K3 |
| Model year | 2013 |
| Installation position | Left front |
| Lighting configuration | China-market specification |
Wholesale Supply and Protective Packing
Mixed orders should establish vehicle application and side clearly, with protective packing around the optical face and electrical connections.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left KIA K3 headlamp, the china-market specification specification should be assessed together with the 2013 body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
The left K3 lighting package should remain the reference during electrical review. The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
When fitting the KIA K3 unit at the left front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
How should headlamp fitment be confirmed?
For the left K3 lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
What should be checked before installation?
For the K3, look over the vehicle supports, cross-check every fixing point, verify the connector and complete a no-force trial fit.
