92101-3W020 Head Light for KIA Sportage 2011 Left
Primary OE reference: 92101-3W020
Cross-reference number 1: 92101-3W020
Product type: Head Light Assembly
Applicable vehicle: KIA Sportage 2011
Installation position: Left front headlamp position
Brand: KIA
Model: Sportage
Vehicle year: 2011
Lighting configuration: base equipment version
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.
Optical system: Recognize whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Shield projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.
Installation guidance: Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the left KIA Sportage application with base equipment version, look over the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-3W020 for KIA Sportage 2011, with the left position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the Sportage application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Inspect the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate surrounding variants.
Protect projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore nearby covers only after functional testing, and verify bonnet and bumper clearances one final time.
A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-3W020 |
| Cross-reference numbers | 92101-3W020 |
| Internal item code | KA04001-063 |
| Vehicle brand | KIA |
| Vehicle model | Sportage |
| Model year | 2011 |
| Installation position | Left front |
| Lighting configuration | base equipment version |
Wholesale Supply and Protective Packing
For repeat orders, keep the approved product photographs and application record so the same optical and mounting version is selected.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left KIA Sportage headlamp, the base equipment version specification should be assessed together with the 2011 body application. Use the original assembly to inspect the shell profile, upper support shape and clearance around surrounding trim before installation.
The left Sportage lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the KIA Sportage unit at the left front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore nearby covers only after functional testing, and verify bonnet and bumper clearances one final time.
Frequently Asked Questions
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
What information supports a wholesale quotation?
State the KIA Sportage application, production year, left side, lighting version, quantity and delivery country.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
How can connector compatibility be reviewed?
Review keying, terminal count, latch direction and wire exit, then determine any required ballast, driver or levelling motor.
