92101-2S020 Head Light for HYUNDAI ix35 2013-2016 Left
Primary OE reference: 92101-2S020
Cross-reference number 1: 92101-2S020
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI ix35 2013-2016
Installation position: Left front headlamp position
Brand: HYUNDAI
Model: ix35
Vehicle year: 2013-2016
Lighting configuration: standard equipment version, China-market specification
Housing comparison: Use the original assembly to check the shell profile, upper support shape and clearance around surrounding trim before installation.
Optical system: Confirm that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Review every plug and socket with the original unit and confirm whether the levelling motor, ballast or LED driver is included or transferred.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the left HYUNDAI ix35 application with standard equipment version, china-market specification, identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 92101-2S020 for HYUNDAI ix35 2013-2016, with the left position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Confirm that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the ix35 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Use the original assembly to review the shell profile, upper support shape and clearance around neighbouring trim before installation.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-2S020 |
| Cross-reference numbers | 92101-2S020 |
| Internal item code | HY04001-287 |
| Vehicle brand | HYUNDAI |
| Vehicle model | ix35 |
| Model year | 2013-2016 |
| Installation position | Left front |
| Lighting configuration | standard equipment version, China-market specification |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HYUNDAI ix35 headlamp, the standard equipment version, china-market specification specification should be assessed together with the 2013-2016 body application. Use the original assembly to review the shell profile, upper support shape and clearance around neighbouring trim before installation.
The left ix35 lighting package should remain the reference during electrical review. Evaluate every plug and socket with the original unit and validate whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HYUNDAI ix35 unit at the left front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore neighbouring covers only after functional testing, and verify bonnet and bumper clearances one final time.
Frequently Asked Questions
Can a headlamp be chosen by appearance alone?
No. The left lamp must also align with the optical system, electrical interface, mounting features and market specification.
What should be checked before installation?
For the ix35, look over the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
How should headlamp fitment be confirmed?
For the left ix35 lamp, evaluate the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
Are bulbs and electronic modules included?
The included components are those photographed in the product photographs. Verify bulbs, caps, motors, ballasts and LED modules separately.
