92101-1C501 Head Light for HYUNDAI Getz 2006 Left
Primary OE reference: 92101-1C501
Cross-reference number 1: 92101-1C501
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2006
Installation position: Left front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2006
Lighting configuration: Align with the photographed optical configuration
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a alternative rear casing or bracket offset.
Optical system: Establish that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Transfer only undamaged reusable hardware, establish the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the left HYUNDAI Getz application with align with the photographed optical configuration, establish that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-1C501 for HYUNDAI Getz 2006, with the left position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-1C501 |
| Cross-reference numbers | 92101-1C501 |
| Internal item code | HY04001-021 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2006 |
| Installation position | Left front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HYUNDAI Getz headlamp, the agree with the photographed optical configuration specification should be assessed together with the 2006 body application. Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The left Getz lighting package should remain the reference during electrical review. Cross-check every plug and socket with the original unit and validate whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HYUNDAI Getz unit at the left front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Frequently Asked Questions
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
How can connector compatibility be reviewed?
Cross-check keying, terminal count, latch direction and wire exit, then establish any required ballast, driver or levelling motor.
How should headlamp fitment be confirmed?
For the left Getz lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
