92101-1C000 Head Light for HYUNDAI Getz 2002 Left
Primary OE reference: 92101-1C000
Cross-reference number 1: 92101-1C000
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2002
Installation position: Left front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2002
Lighting configuration: Align with the photographed optical configuration
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.
Optical system: Cross-check the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Verify that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the left HYUNDAI Getz application with align with the photographed optical configuration, verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-1C000 for HYUNDAI Getz 2002, with the left position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Evaluate the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Confirm that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-1C000 |
| Cross-reference numbers | 92101-1C000 |
| Internal item code | HY04001-013 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2002 |
| Installation position | Left front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HYUNDAI Getz headlamp, the align with the photographed optical configuration specification should be assessed together with the 2002 body application. Use the original assembly to check the shell profile, upper support shape and clearance around nearby trim before installation.
The left Getz lighting package should remain the reference during electrical review. Evaluate every plug and socket with the original unit and confirm whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HYUNDAI Getz unit at the left front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a alternative casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
How should headlamp fitment be confirmed?
For the left Getz lamp, evaluate the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
Are bulbs and electronic modules included?
The included components are those observable in the product photographs. Check bulbs, caps, motors, ballasts and LED modules separately.
What should be checked before installation?
For the Getz, examine the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
