26065-EW80A Head Light for NISSAN Sylphy Left
Primary OE reference: 26065-EW80A
Cross-reference number 1: 26065-EW80A
Product type: Head Light Assembly
Applicable vehicle: NISSAN Sylphy
Installation position: Left front headlamp position
Brand: NISSAN
Model: Sylphy
Vehicle year: Establish by production record
Lighting configuration: Agree with the photographed optical configuration
Housing comparison: Lay the replacement beside the removed unit and review overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
Electrical interface: Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Examine every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: Use recommended workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the left NISSAN Sylphy application with agree with the photographed optical configuration, establish that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 26065-EW80A for NISSAN Sylphy, with the left position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
For the Sylphy application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 26065-EW80A |
| Cross-reference numbers | 26065-EW80A |
| Internal item code | NS04001-067 |
| Vehicle brand | NISSAN |
| Vehicle model | Sylphy |
| Model year | Confirm by production record |
| Installation position | Left front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left NISSAN Sylphy headlamp, the align with the photographed optical configuration specification should be assessed together with the Confirm by production record body application. Use the original assembly to review the shell profile, upper support shape and clearance around adjacent trim before installation.
The left Sylphy lighting package should remain the reference during electrical review. Evaluate every plug and socket with the original unit and confirm whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the NISSAN Sylphy unit at the left front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, validate the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
Are bulbs and electronic modules included?
The included components are those observable in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What should be checked before installation?
For the Sylphy, review the vehicle supports, review every fixing point, verify the connector and complete a no-force trial fit.
How can connector compatibility be reviewed?
Evaluate keying, terminal count, latch direction and wire exit, then determine any required ballast, driver or levelling motor.
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
