26060-6CA5B Head Light for NISSAN Altima Left
Primary OE reference: 26060-6CA5B
Cross-reference number 1: 26060-6CA5B
Product type: Head Light Assembly
Applicable vehicle: NISSAN Altima
Installation position: Left front headlamp position
Brand: NISSAN
Model: Altima
Vehicle year: Establish by production record
Lighting configuration: premium equipment version, US-market specification
Housing comparison: Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Look over the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Transfer only undamaged reusable hardware, establish the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the left NISSAN Altima application with premium equipment version, us-market specification, review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Head Light Assembly Overview
The headlamp shown should be chosen as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 26060-6CA5B for NISSAN Altima, with the left position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Inspect the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.
For the Altima application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore adjacent covers only after functional testing, and check bonnet and bumper clearances one final time.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 26060-6CA5B |
| Cross-reference numbers | 26060-6CA5B |
| Internal item code | NS04001-061 |
| Vehicle brand | NISSAN |
| Vehicle model | Altima |
| Model year | Confirm by production record |
| Installation position | Left front |
| Lighting configuration | premium equipment version, US-market specification |
Wholesale Supply and Protective Packing
For repeat orders, keep the approved product photographs and application record so the same optical and mounting version is chosen.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left NISSAN Altima headlamp, the premium equipment version, us-market specification specification should be assessed together with the Validate by production record body application. Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The left Altima lighting package should remain the reference during electrical review. The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
When fitting the NISSAN Altima unit at the left front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
How should headlamp fitment be confirmed?
For the left Altima lamp, review the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
Can a headlamp be chosen by appearance alone?
No. The left lamp must also align with the optical system, electrical interface, mounting features and market specification.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
What information supports a wholesale quotation?
State the NISSAN Altima application, production year, left side, lighting version, quantity and delivery country.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
