81170-26410 Head Light for TOYOTA HiAce 2004-2007 Left
Primary OE reference: 81170-26410
Cross-reference number 1: 81170-26410
Product type: Head Light Assembly
Applicable vehicle: TOYOTA HiAce 2004-2007
Installation position: Left front headlamp position
Brand: TOYOTA
Model: HiAce
Vehicle year: 2004-2007
Lighting configuration: Align with the photographed optical configuration
Housing comparison: Use the original assembly to check the shell profile, upper support shape and clearance around adjacent trim before installation.
Optical system: Determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Use approved workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the left TOYOTA HiAce application with align with the photographed optical configuration, review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 81170-26410 for TOYOTA HiAce 2004-2007, with the left position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Recognize whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the HiAce application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Cross-check the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81170-26410 |
| Cross-reference numbers | 81170-26410 |
| Internal item code | TY04001-187 |
| Vehicle brand | TOYOTA |
| Vehicle model | HiAce |
| Model year | 2004-2007 |
| Installation position | Left front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left TOYOTA HiAce headlamp, the align with the photographed optical configuration specification should be assessed together with the 2004-2007 body application. Use the original assembly to review the shell profile, upper support shape and clearance around neighbouring trim before installation.
The left HiAce lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the TOYOTA HiAce unit at the left front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore neighbouring covers only after functional testing, and review bonnet and bumper clearances one final time.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
