81150-0R350 Head Light for TOYOTA RAV4 2023 Left
Primary OE reference: 81150-0R350
Cross-reference number 1: 81150-0R350
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2023
Installation position: Left front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2023
Lighting configuration: premium equipment version
Housing comparison: Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Establish that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: Mixed orders should determine vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the left TOYOTA RAV4 application with premium equipment version, review the lens pattern, internal bezel finish and optical modules so the specified unit matches the intended lighting package.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 81150-0R350 for TOYOTA RAV4 2023, with the left position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.
Confirm that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore neighbouring covers only after functional testing, and check bonnet and bumper clearances one final time.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81150-0R350 |
| Cross-reference numbers | 81150-0R350 |
| Internal item code | TY04001-175 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2023 |
| Installation position | Left front |
| Lighting configuration | premium equipment version |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left TOYOTA RAV4 headlamp, the premium equipment version specification should be assessed together with the 2023 body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.
The left RAV4 lighting package should remain the reference during electrical review. Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the TOYOTA RAV4 unit at the left front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
How can connector compatibility be reviewed?
Cross-check keying, terminal count, latch direction and wire exit, then determine any required ballast, driver or levelling motor.
What distinguishes neighbouring lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
Are bulbs and electronic modules included?
The included components are those photographed in the product photographs. Check bulbs, caps, motors, ballasts and LED modules separately.
How should headlamp fitment be confirmed?
For the left RAV4 lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
