81110-02B60 Head Light for TOYOTA Corolla 2011 Right
Primary OE reference: 81110-02B60
Cross-reference number 1: 81110-02B60
Product type: Head Light Assembly
Applicable vehicle: TOYOTA Corolla 2011
Installation position: Right front headlamp position
Brand: TOYOTA
Model: Corolla
Vehicle year: 2011
Lighting configuration: black internal bezel, US-market specification
Housing comparison: Inspect the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate surrounding variants.
Optical system: Review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: Mixed orders should determine vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the right TOYOTA Corolla application with black internal bezel, us-market specification, inspect reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
This product record supports physical comparison of a front lamp assembly for workshop replacement and wholesale purchasing. It is catalogued under OE reference 81110-02B60 for TOYOTA Corolla 2011, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the Corolla application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and review overall depth, edge returns, vent locations and rear-cover clearance.
Check mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore nearby covers only after functional testing, and verify bonnet and bumper clearances one final time.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-02B60 |
| Cross-reference numbers | 81110-02B60 |
| Internal item code | TY04001-110 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2011 |
| Installation position | Right front |
| Lighting configuration | black internal bezel, US-market specification |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is chosen.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA Corolla headlamp, the black internal bezel, us-market specification specification should be assessed together with the 2011 body application. Review the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The right Corolla lighting package should remain the reference during electrical review. Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the TOYOTA Corolla unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore nearby covers only after functional testing, and verify bonnet and bumper clearances one final time.
Frequently Asked Questions
How can connector compatibility be reviewed?
Review keying, terminal count, latch direction and wire exit, then establish any required ballast, driver or levelling motor.
How should headlamp fitment be confirmed?
For the right Corolla lamp, review the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
What information supports a wholesale quotation?
State the TOYOTA Corolla application, production year, right side, lighting version, quantity and delivery country.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also agree with the optical system, electrical interface, mounting features and market specification.
