33100-TMO-H01 Head Light for HONDA City Right
Primary OE reference: 33100-TMO-H01
Cross-reference number 1: 33100-TMO-H01
Product type: Head Light Assembly
Applicable vehicle: HONDA City
Installation position: Right front headlamp position
Brand: HONDA
Model: City
Vehicle year: Validate by production record
Lighting configuration: Correspond to the photographed optical configuration
Housing comparison: Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
Electrical interface: Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Look over every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right HONDA City application with correspond to the photographed optical configuration, inspect reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The headlamp shown should be requested as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 33100-TMO-H01 for HONDA City, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
For the City application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 33100-TMO-H01 |
| Cross-reference numbers | 33100-TMO-H01 |
| Internal item code | HD04001-068 |
| Vehicle brand | HONDA |
| Vehicle model | City |
| Model year | Confirm by production record |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HONDA City headlamp, the agree with the photographed optical configuration specification should be assessed together with the Establish by production record body application. Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
The right City lighting package should remain the reference during electrical review. Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the HONDA City unit at the right front position, preserve even body gaps and the intended beam orientation. Use appropriate workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a different casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What distinguishes neighbouring lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
How should headlamp fitment be confirmed?
For the right City lamp, review the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
