33100-TVA-A11 Head Light for HONDA Accord 2016-2020 Right
Primary OE reference: 33100-TVA-A11
Cross-reference number 1: 33100-TVA-A11
Product type: Head Light Assembly
Applicable vehicle: HONDA Accord 2016-2020
Installation position: Right front headlamp position
Brand: HONDA
Model: Accord
Vehicle year: 2016-2020
Lighting configuration: standard equipment version
Housing comparison: Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
Electrical interface: Compare every plug and socket with the original unit and confirm whether the levelling motor, ballast or LED driver is included or transferred.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Use suitable workshop procedures for removal and refitting, then confirm that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the right HONDA Accord application with standard equipment version, look over the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 33100-TVA-A11 for HONDA Accord 2016-2020, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and confirm whether daytime lighting is integrated into the main housing.
For the Accord application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Use the original assembly to check the shell profile, upper support shape and clearance around nearby trim before installation.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 33100-TVA-A11 |
| Cross-reference numbers | 33100-TVA-A11 |
| Internal item code | HD04001-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2016-2020 |
| Installation position | Right front |
| Lighting configuration | standard equipment version |
Wholesale Supply and Protective Packing
Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HONDA Accord headlamp, the standard equipment version specification should be assessed together with the 2016-2020 body application. Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The right Accord lighting package should remain the reference during electrical review. Cross-check every plug and socket with the original unit and establish whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HONDA Accord unit at the right front position, preserve even body gaps and the intended beam orientation. Use approved workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also align with the optical system, electrical interface, mounting features and market specification.
How can connector compatibility be reviewed?
Cross-check keying, terminal count, latch direction and wire exit, then identify any required ballast, driver or levelling motor.
