8R0 807 313C Bumper Reinforcement for AUDI Q5 2010 Rear
Primary OE reference: 8R0 807 313C
Product type: Bumper Reinforcement
Applicable vehicle: AUDI Q5 2010
Installation position: Rear bumper
Brand: AUDI
Model: Q5
Vehicle year: 2010
Physical comparison: Lay the original and replacement parts on for 8R0 807 313C a flat surface to compare curvature, flange angle and overall reach.
Component design: The component occupies the space between the for 8R0 807 313C bumper skin and vehicle body, where bracket offset determines fitment.
Installation guidance: Remove the bumper cover using the workshop for 8R0 807 313C sequence, support surrounding trim and expose all original fasteners before loosening the beam.
Wholesale enquiry: A rear-view photograph of the removed component for 8R0 807 313C helps confirm hidden brackets before volume ordering.
8R0 807 313C Bumper Reinforcement Overview
This 8R0 807 313C listing covers the rear bumper reinforcement for AUDI Q5 2010. Its photographed mounting form identifies the supplied version.
The assembly combines a transverse section with for 8R0 807 313C model-specific end supports for the stated vehicle position.
Model-Year and Position Confirmation
Use the removed assembly as a physical for 8R0 807 313C gauge for bracket height, beam sweep and fastener orientation.
Confirm 8R0 807 313C against the production period and rear bumper location. Similar covers on AUDI Q5 2010 can conceal different support sections.
Physical Comparison Points
The supplied part is intended for a for 8R0 807 313C defined bumper position, with attachment details that are not universal across facelifts.
Check the outer mounting plates, central section for 8R0 807 313C profile and distance between chassis-side attachment points.
Practical Replacement Notes
Inspect the chassis-side threads, compare the removed for 8R0 807 313C part and complete a full dry fit before refinishing exposed metal.
Before installing 8R0 807 313C, a qualified repair professional should assess collision distortion at the AUDI Q5 2010 mounting faces.
Automotive Component Specifications
| Product type | Bumper Reinforcement |
|---|---|
| Primary OE reference | 8R0 807 313C |
| Cross-reference numbers | 8R0 807 313C |
| Internal item code | AD03004-058 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2010 |
| Installation position | Rear bumper |
Trade Ordering Notes
State whether the requirement is a metal for 8R0 807 313C reinforcement or foam energy absorber so the correct product form is selected.
Frequently Asked Questions
How is 8R0 807 313C fitment verified?
Confirm 8R0 807 313C against AUDI Q5 2010, the rear position and the complete mounting geometry shown in the product photo.
Which physical points should be compared?
Check whether the beam ends step upward for 8R0 807 313C or downward and confirm the bracket faces align without preload.
Is 8R0 807 313C a universal bumper component?
No. The 8R0 807 313C span, absorber profile, brackets and mounting points are specific to AUDI Q5 2010.
What preparation is recommended for 8R0 807 313C?
Keep wiring, parking-sensor looms and air guides for 8R0 807 313C clear while bringing the beam into the vehicle-side mounting position.
Which details support a 8R0 807 313C trade quotation?
For consolidated export orders, list each application for 8R0 807 313C separately and confirm packing protection for projecting brackets.
Need a quotation for 8R0 807 313C? Contact Yongshang Auto with vehicle, bumper position, quantity and destination.
