8T0 807 309 Bumper Reinforcement for AUDI A5 2009 Rear
Primary OE reference: 8T0 807 309
Product type: Bumper Reinforcement
Applicable vehicle: AUDI A5 2009
Installation position: Rear bumper
Brand: AUDI
Model: A5
Vehicle year: 2009
Physical comparison: Use the removed assembly as a physical for 8T0 807 309 gauge for bracket height, beam sweep and fastener orientation.
Component design: The reinforcement mounts behind the exterior bumper for 8T0 807 309 cover and follows a vehicle-specific body interface.
Installation guidance: Use suitable support during removal because a for 8T0 807 309 long reinforcement can rotate after the last fastener is released.
Wholesale enquiry: Provide planned quantity and delivery country together for 8T0 807 309 with the verified part reference for accurate trade handling.
8T0 807 309 Bumper Reinforcement Overview
This 8T0 807 309 listing covers the rear bumper reinforcement for AUDI A5 2009. Its photographed mounting form identifies the supplied version.
This application-specific part must match the body-side for 8T0 807 309 interface as well as the bumper package installed on the vehicle.
Fitment Evidence for the Reinforcement
Compare the beam span, end-bracket offset and for 8T0 807 309 bolt-hole centres with the removed component before fitting.
Confirm 8T0 807 309 against the production period and rear bumper location. Similar covers on AUDI A5 2009 can conceal different support sections.
Mounting Structure and Clearance
Vehicle production changes may alter beam section, for 8T0 807 309 support plates or mounting holes even when the model name is unchanged.
Match the vertical offset of the centre for 8T0 807 309 section and the depth of each end plate to the original bumper structure.
Installation Preparation
Keep wiring, parking-sensor looms and air guides for 8T0 807 309 clear while bringing the beam into the vehicle-side mounting position.
Before installing 8T0 807 309, a qualified repair professional should assess collision distortion at the AUDI A5 2009 mounting faces.
Automotive Component Specifications
| Product type | Bumper Reinforcement |
|---|---|
| Primary OE reference | 8T0 807 309 |
| Cross-reference numbers | 8T0 807 309 |
| Internal item code | AD03004-027 |
| Vehicle brand | AUDI |
| Vehicle model | A5 |
| Model year | 2009 |
| Installation position | Rear bumper |
Trade Ordering Notes
Where two references are shown, confirm which for 8T0 807 309 number appears on the removed vehicle part before order approval.
Frequently Asked Questions
How is 8T0 807 309 fitment verified?
Confirm 8T0 807 309 against AUDI A5 2009, the rear position and the complete mounting geometry shown in the product photo.
Which physical points should be compared?
Confirm the left and right end brackets for 8T0 807 309 face the correct direction and sit square against the body mounting faces.
Is 8T0 807 309 a universal bumper component?
No. The 8T0 807 309 span, absorber profile, brackets and mounting points are specific to AUDI A5 2009.
What preparation is recommended for 8T0 807 309?
Protect painted panels during handling and verify for 8T0 807 309 a consistent bumper-cover gap after the hidden support is secured.
Which details support a 8T0 807 309 trade quotation?
Wholesale requests should separate front and rear for 8T0 807 309 demand and include a photo of the removed part when market versions differ.
Need a quotation for 8T0 807 309? Contact Yongshang Auto with vehicle, bumper position, quantity and destination.
