81511-12830 Corner Light for TOYOTA Corolla 1998 Right
Primary OE reference: 81511-12830
Product type: Corner Light / Parking Lamp
Applicable vehicle: TOYOTA Corolla 1998
Installation position: Front corner / parking lamp opening
Side / orientation: Right
Brand: TOYOTA
Model: Corolla
Vehicle year: 1998
Physical comparison: Use the product image to match the visible lens shape together with the concealed front corner mounting points.
Lighting function: The component occupies a vehicle-specific front corner opening and should match both the electrical role and body contour.
Electrical check: Inspect the rubber seal for compression marks and verify that its mating surface remains clean and even.
Installation guidance: After clipping the lamp in place, pull lightly at the housing edge to confirm positive retention.
Selection context: Record the verified body style with the OE reference so future replenishment uses the approved configuration.
Product handling: Check the visible surface under neutral light and confirm the rear body has not been distorted.
Wholesale enquiry: Repeat orders should reference the approved vehicle application and installation side.
81511-12830 Corner Light Overview
This vehicle-specific corner light is listed for TOYOTA Corolla 1998 at the right corner-lamp position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Compare both front and rear product photographs whenever several corner-lamp versions appear similar. The assembly is designed around the vehicle front corner profile, not as a universal surface-mounted light.
Model, Year and Side Confirmation
Review the exposed face and rear support geometry as one assembly rather than selecting by colour alone.
For TOYOTA Corolla 1998, confirm the front corner aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Housing Geometry and Wiring Details
Once seated, the corner lamp should preserve visibility while remaining level with the adjoining bodywork.
Where a bulb holder is used, compare its twist-lock pattern and contact layout with the original assembly. Lens colour and reflector texture should also be compared under neutral lighting.
Fitting Preparation and Alignment
Guide the connector through the access opening first, leaving enough slack to lock the housing without strain.
Keep left and right units in separate labelled sleeves until the vehicle-side requirement is confirmed. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Corner Light / Parking Lamp |
|---|---|
| Primary OE reference | 81511-12830 |
| Cross-reference numbers | 81511-12830 |
| Internal item code | TY04006-009 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 1998 |
| Installation position | Front corner / parking lamp opening |
| Side / orientation | Right |
Wholesale Supply and Packing
For paired purchasing, state whether equal left-right quantities or a single replacement side is required. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 81511-12830 compatibility be confirmed?
Match the OE reference, TOYOTA Corolla production year, installation side, connector and hidden mounting geometry.
Can left and right front corner lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Inspect the front corner cut-out from behind, then match the lamp shoulder and retention groove to that opening. Make sure the cable grommet faces away from water traps and remains fully seated after the lamp is clipped in.
What test is recommended after fitting?
Support the rear of the opening while seating the clip so pressure is not concentrated on the lens.
Which details are needed for a wholesale quote?
State the destination and carton-marking format when the order combines several vehicle applications.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
