81510-YC040 Corner Light for TOYOTA Camry 2000 Right
Primary OE reference: 81510-YC040
Product type: Corner Light / Parking Lamp
Applicable vehicle: TOYOTA Camry 2000
Installation position: Front corner / parking lamp opening
Side / orientation: Right
Brand: TOYOTA
Model: Camry
Vehicle year: 2000
Physical comparison: Measure the housing projection and compare every moulded locator with the removed component.
Lighting function: The marker supplies a defined side-lighting cue and must retain the specified lens colour and orientation.
Electrical check: Check the connector latch by hand and avoid using wire tension to hold the plug against the lamp body.
Installation guidance: Clean the opening, engage the guide features first and press only at supported areas of the housing.
Selection context: Confirm model year, side and lens colour before approving a mixed wholesale order.
Product handling: Handle the lamp by its housing edges and keep fingerprints away from the patterned optical surface.
Wholesale enquiry: Provide the connector photograph with annual demand so stocking advice reflects the approved electrical version.
81510-YC040 Corner Light Overview
This vehicle-specific corner light is listed for TOYOTA Camry 2000 at the right corner-lamp position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Confirm whether the vehicle uses a clear, amber or smoked repeater before final product approval. This corner lamp helps communicate vehicle presence and, where wired as an indicator, supports turn-signal visibility.
Fitment Evidence for the Corner Lamp
Use the adjacent body crease as a visual reference while checking whether the optical face sits parallel.
For TOYOTA Camry 2000, confirm the front corner aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Optical Surface and Connector Review
Correct lens orientation and secure mounting preserve the side-lighting function and an even exterior finish.
Compare the terminal blade orientation and locking ramp before the plug is brought into final engagement. Lens colour and reflector texture should also be compared under neutral lighting.
Workshop Installation Guidance
Restore the splash liner only after checking that the harness cannot rub against the tyre-side panel.
Before fitting, inspect the lens, seal, connector and mounting tabs for transport damage. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Corner Light / Parking Lamp |
|---|---|
| Primary OE reference | 81510-YC040 |
| Cross-reference numbers | 81510-YC040 |
| Internal item code | TY04006-004 |
| Vehicle brand | TOYOTA |
| Vehicle model | Camry |
| Model year | 2000 |
| Installation position | Front corner / parking lamp opening |
| Side / orientation | Right |
Wholesale Supply and Packing
Sample approval should record the front corner position before volume production and export packing are released. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 81510-YC040 compatibility be confirmed?
Match the OE reference, TOYOTA Camry production year, installation side, connector and hidden mounting geometry.
Can left and right front corner lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Place both units on a flat surface to compare connector angle, housing offset and support-leg length. Confirm the harness reaches the lamp without tension and remains clear of sharp sheet-metal edges.
What test is recommended after fitting?
Remove loose debris from the aperture and align the narrow end of the lamp before seating the main retainer.
Which details are needed for a wholesale quote?
For wholesale pricing, provide OE reference, vehicle, side, quantity and destination.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
