81620-33020 Corner Light for TOYOTA Camry SXV 1992 Left
Primary OE reference: 81620-33020
Product type: Corner Light / Parking Lamp
Applicable vehicle: TOYOTA Camry SXV 1992
Installation position: Front corner / parking lamp opening
Side / orientation: Left
Brand: TOYOTA
Model: Camry SXV
Vehicle year: 1992
Physical comparison: Compare the lens outline, rear housing depth and locating-tab direction with the removed corner lamp.
Lighting function: Correct lens orientation and secure mounting preserve the side-lighting function and an even exterior finish.
Electrical check: Compare the terminal blade orientation and locking ramp before the plug is brought into final engagement.
Installation guidance: Apply even hand pressure along the supported frame instead of pressing the centre of the optical lens.
Selection context: Separate decorative front corner inserts from powered repeaters when preparing the purchase specification.
Product handling: Keep the optical face protected until the product has passed the physical comparison.
Wholesale enquiry: Export packing can be planned after the required variant and order volume are confirmed.
81620-33020 Corner Light Overview
This vehicle-specific corner light is listed for TOYOTA Camry SXV 1992 at the left corner-lamp position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Confirm model year, side and lens colour before approving a mixed wholesale order. A correctly positioned side lamp supports signalling awareness without interrupting the exterior panel line.
Vehicle Application and Front Corner Position
Confirm the lamp body sits level in the front corner aperture without forcing the plastic retainers.
For TOYOTA Camry SXV 1992, confirm the front corner aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Lens, Housing and Electrical Interface
The lamp provides a compact signalling point whose beam direction depends on correct left-right placement.
Verify the socket or plug style and check that the seal remains square when the connector is locked. Lens colour and reflector texture should also be compared under neutral lighting.
Installation and Function Check
Remove loose debris from the aperture and align the narrow end of the lamp before seating the main retainer.
Check for fine lens cracks around the clip base where transport stress can remain difficult to see. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Corner Light / Parking Lamp |
|---|---|
| Primary OE reference | 81620-33020 |
| Cross-reference numbers | 81620-33020 |
| Internal item code | TY04006-001 |
| Vehicle brand | TOYOTA |
| Vehicle model | Camry SXV |
| Model year | 1992 |
| Installation position | Front corner / parking lamp opening |
| Side / orientation | Left |
Wholesale Supply and Packing
Include body style and lens colour in the enquiry when regional versions use different side repeaters. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 81620-33020 compatibility be confirmed?
Match the OE reference, TOYOTA Camry SXV production year, installation side, connector and hidden mounting geometry.
Can left and right front corner lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Set the removed marker beside the replacement and compare lens taper, flange width and rear clip height. Compare the earth and signal-contact locations whenever the replacement uses an integrated pigtail.
What test is recommended after fitting?
Dry-fit the unit, align the lens with the body surface and secure the retainer without twisting the lamp.
Which details are needed for a wholesale quote?
Provide the connector photograph with annual demand so stocking advice reflects the approved electrical version.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
