81130-20220 Fender Light for TOYOTA Corolla EX 2003 Left / Right
Primary OE reference: 81130-20220
Product type: Fender Light / Side Marker Lamp
Applicable vehicle: TOYOTA Corolla EX 2003
Installation position: Front fender / side marker opening
Side / orientation: Left / Right
Brand: TOYOTA
Model: Corolla EX
Vehicle year: 2003
Physical comparison: Use the product image to match the visible lens shape together with the concealed fender mounting points.
Lighting function: The component occupies a vehicle-specific fender opening and should match both the electrical role and body contour.
Electrical check: Inspect the rubber seal for compression marks and verify that its mating surface remains clean and even.
Installation guidance: After clipping the lamp in place, pull lightly at the housing edge to confirm positive retention.
Selection context: Record the verified body style with the OE reference so future replenishment uses the approved configuration.
Product handling: Check the visible surface under neutral light and confirm the rear body has not been distorted.
Wholesale enquiry: Repeat orders should reference the approved vehicle application and installation side.
81130-20220 Fender Light Overview
This vehicle-specific fender light is listed for TOYOTA Corolla EX 2003 at the left / right side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Compare both front and rear product photographs whenever several side-marker versions appear similar. The assembly is designed around the vehicle fender profile, not as a universal surface-mounted light.
Model, Year and Side Confirmation
Review the exposed face and rear support geometry as one assembly rather than selecting by colour alone.
For TOYOTA Corolla EX 2003, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Housing Geometry and Wiring Details
Once seated, the side marker should preserve visibility while remaining level with the adjoining bodywork.
Where a bulb holder is used, compare its twist-lock pattern and contact layout with the original assembly. Lens colour and reflector texture should also be compared under neutral lighting.
Fitting Preparation and Alignment
Guide the connector through the access opening first, leaving enough slack to lock the housing without strain.
Keep left and right units in separate labelled sleeves until the vehicle-side requirement is confirmed. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Fender Light / Side Marker Lamp |
|---|---|
| Primary OE reference | 81130-20220 |
| Cross-reference numbers | 81130-20220 |
| Internal item code | TY04005-006 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla EX |
| Model year | 2003 |
| Installation position | Front fender / side marker opening |
| Side / orientation | Left / Right |
Wholesale Supply and Packing
For paired purchasing, state whether equal left-right quantities or a single replacement side is required. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 81130-20220 compatibility be confirmed?
Match the OE reference, TOYOTA Corolla EX production year, installation side, connector and hidden mounting geometry.
Can left and right fender lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Inspect the fender cut-out from behind, then match the lamp shoulder and retention groove to that opening. Make sure the cable grommet faces away from water traps and remains fully seated after the lamp is clipped in.
What test is recommended after fitting?
Support the rear of the opening while seating the clip so pressure is not concentrated on the lens.
Which details are needed for a wholesale quote?
State the destination and carton-marking format when the order combines several vehicle applications.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
