80A 945 069 Rear Bumper Light for AUDI Q5 2018 Left
Primary OE reference: 80A 945 069
Product type: Rear Bumper Light
Applicable vehicle: AUDI Q5 2018
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: AUDI
Model: Q5
Vehicle year: 2018
Fitment evidence: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Optical configuration: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Electrical interface: Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Final alignment: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
Post-fit check: Once seated, inspect the perimeter gap and verify that the bumper surface remains relaxed rather than distorted.
Bulk supply: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Packing reference: The visible face should remain separated from tape, staples and loose hardware throughout transport.
80A 945 069 Rear Bumper Light Overview
This product is listed for AUDI Q5 2018 at the left rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
At the workshop selection stage for Q5, compare the outer lens edge with the moulded bumper recess to avoid contact with wiring, body edges or hot exhaust components.
Bumper Opening and Vehicle Match
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
At the left rear-bumper position, inspect the lower valance and nearby exhaust trim for adequate operating clearance to keep the optical face level with the surrounding painted surface.
When reviewing the 2018 vehicle, check the rear housing projection against the space behind the bumper skin before any modification is made to the bumper or replacement part.
Lens Construction and Powered Variants
Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.
For the AUDI Q5 application, compare the bumper corner radius with the product face from more than one viewing angle before deciding whether original hardware is suitable for reuse.
For this Q5 body configuration, align each locating tab with the matching slot before applying hand pressure because facelift bumpers can retain the same vehicle name with different apertures.
Mounting and Final Verification
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Check the opposite side as a reference for height, angle and edge gap before completing the repair.
Before approving the Q5 part for packing, check whether the original component uses a separate retainer or an integral locking tab so left- and right-hand stock cannot be mixed during consolidation.
Before fitting the left unit, verify the fastener direction and the shape of the concealed support frame so the approved product can be picked consistently in a mixed wholesale order.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 80A 945 069 |
| Cross-reference numbers | 80A 945 069 |
| Internal item code | AD04004-045 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.
Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
While the AUDI bumper opening is accessible, protect the visible surface until the full perimeter gap has been accepted so hidden brackets are not loaded or bent during installation.
During comparison of the AUDI rear component, review the reflector texture and lens colour in neutral workshop light to preserve access for a final electrical test where a lamp circuit is present.
Frequently Asked Questions
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
Request a Product-Specific Quote
Repeat buyers can reference the vehicle application and side from their previous approved sample.
