92406-D4500 Rear Bumper Light for KIA K5 2019 Right
Primary OE reference: 92406-D4500
Product type: Rear Bumper Light
Applicable vehicle: KIA K5 2019
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: KIA
Model: K5
Vehicle year: 2019
Fitment evidence: Review the corner radius, edge return and rear fastening points against the original bumper opening.
Optical configuration: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Electrical interface: Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Final alignment: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
Post-fit check: Check the opposite side as a reference for height, angle and edge gap before completing the repair.
Bulk supply: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.
Packing reference: The visible face should remain separated from tape, staples and loose hardware throughout transport.
92406-D4500 Rear Bumper Light Overview
This product is listed for KIA K5 2019 at the right rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
While the KIA bumper opening is accessible, confirm that any connector seal remains square when the housing is fully seated to reduce clip damage during a no-force trial installation.
Rear-Bumper Geometry Review
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
During comparison of the KIA rear component, use the opposite-side component only as an alignment reference, not as an interchange part to prevent a visually similar version from sitting proud of the bumper.
For a repeat order of the right version, compare the outer lens edge with the moulded bumper recess before the packaging and carton marking are finalized.
Lens, Housing and Harness Comparison
Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.
On the 2019 K5 bumper layout, inspect the lower valance and nearby exhaust trim for adequate operating clearance before inner liners make the rear attachment points difficult to inspect.
At the workshop selection stage for K5, check the rear housing projection against the space behind the bumper skin so the visible gap remains even after every retaining point is engaged.
Installation Completion
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Complete a visual alignment check from the rear and side, then test illumination when wiring is present.
At the right rear-bumper position, compare the bumper corner radius with the product face from more than one viewing angle so the lens and housing are supported without distortion.
When reviewing the 2019 vehicle, align each locating tab with the matching slot before applying hand pressure so a passive reflector is not confused with an illuminated assembly.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92406-D4500 |
| Cross-reference numbers | 92406-D4500 |
| Internal item code | KA04004-054 |
| Vehicle brand | KIA |
| Vehicle model | K5 |
| Model year | 2019 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
For the KIA K5 application, check whether the original component uses a separate retainer or an integral locking tab to verify that the photographed configuration matches the vehicle in the workshop.
For this K5 body configuration, verify the fastener direction and the shape of the concealed support frame to avoid contact with wiring, body edges or hot exhaust components.
Frequently Asked Questions
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
How should the visible lens be packed?
Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Request a Product-Specific Quote
For mixed shipments, send a line-by-line quantity list so each rear-bumper position is quoted independently.
