92406-1Y000 Rear Bumper Light for KIA Picanto 2011 Right
Primary OE reference: 92406-1Y000
Product type: Rear Bumper Light
Applicable vehicle: KIA Picanto 2011
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: KIA
Model: Picanto
Vehicle year: 2011
Physical comparison: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.
Lighting function: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Electrical check: Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Installation guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
Post-fit check: Check the opposite side as a reference for height, angle and edge gap before completing the repair.
Wholesale enquiry: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Packing reference: Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
92406-1Y000 Rear Bumper Light Overview
This product is listed for KIA Picanto 2011 at the right rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.
Production date and regional bumper specification should be reviewed when several near-identical versions are available.
On the 2011 Picanto bumper layout, align each locating tab with the matching slot before applying hand pressure before inner liners make the rear attachment points difficult to inspect.
Physical Fitment Evidence
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
At the workshop selection stage for Picanto, check whether the original component uses a separate retainer or an integral locking tab so the visible gap remains even after every retaining point is engaged.
At the right rear-bumper position, verify the fastener direction and the shape of the concealed support frame so the lens and housing are supported without distortion.
Surface, Seal and Electrical Interface
Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
When reviewing the 2011 vehicle, protect the visible surface until the full perimeter gap has been accepted so a passive reflector is not confused with an illuminated assembly.
For the KIA Picanto application, review the reflector texture and lens colour in neutral workshop light to verify that the photographed configuration matches the vehicle in the workshop.
Bumper Assembly Check
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Complete a visual alignment check from the rear and side, then test illumination when wiring is present.
For this Picanto body configuration, record the approved side and vehicle application for repeat-order identification to avoid contact with wiring, body edges or hot exhaust components.
Before approving the Picanto part for packing, confirm that the cable exit, where fitted, clears the bumper reinforcement to keep the optical face level with the surrounding painted surface.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92406-1Y000 |
| Cross-reference numbers | 92406-1Y000 |
| Internal item code | KA04004-018 |
| Vehicle brand | KIA |
| Vehicle model | Picanto |
| Model year | 2011 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
The visible face should remain separated from tape, staples and loose hardware throughout transport.
Before fitting the right unit, confirm that any connector seal remains square when the housing is fully seated before any modification is made to the bumper or replacement part.
While the KIA bumper opening is accessible, use the opposite-side component only as an alignment reference, not as an interchange part before deciding whether original hardware is suitable for reuse.
Frequently Asked Questions
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Request a Product-Specific Quote
Destination and carton-marking requirements can be included with the vehicle-specific enquiry.
