92404-S1000 Rear Bumper Light for HYUNDAI Santa Fe 2019 Right
Primary OE reference: 92404-S1000
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Santa Fe 2019
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HYUNDAI
Model: Santa Fe
Vehicle year: 2019
Fitment evidence: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.
Optical configuration: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Electrical interface: Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Final alignment: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Use the removed component as the physical reference for outer shape, housing projection and clip location.
Post-fit check: After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
Bulk supply: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Packing reference: The visible face should remain separated from tape, staples and loose hardware throughout transport.
92404-S1000 Rear Bumper Light Overview
This product is listed for HYUNDAI Santa Fe 2019 at the right rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.
Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
At the right rear-bumper position, review the reflector texture and lens colour in neutral workshop light so the lens and housing are supported without distortion.
Vehicle-Specific Selection
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
When reviewing the 2019 vehicle, record the approved side and vehicle application for repeat-order identification so a passive reflector is not confused with an illuminated assembly.
For the HYUNDAI Santa Fe application, confirm that the cable exit, where fitted, clears the bumper reinforcement to verify that the photographed configuration matches the vehicle in the workshop.
Passive Reflector or Lamp Configuration
Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Protect the exposed face from tools and fasteners while the bumper liner is open for access.
For this Santa Fe body configuration, confirm that any connector seal remains square when the housing is fully seated to avoid contact with wiring, body edges or hot exhaust components.
Before approving the Santa Fe part for packing, use the opposite-side component only as an alignment reference, not as an interchange part to keep the optical face level with the surrounding painted surface.
Fitting Guidance and Testing
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Photograph the completed fit for repeat-order records when the vehicle uses an uncommon market specification.
Before fitting the right unit, compare the outer lens edge with the moulded bumper recess before any modification is made to the bumper or replacement part.
While the HYUNDAI bumper opening is accessible, inspect the lower valance and nearby exhaust trim for adequate operating clearance before deciding whether original hardware is suitable for reuse.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92404-S1000 |
| Cross-reference numbers | 92404-S1000 |
| Internal item code | HY04004-030 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Santa Fe |
| Model year | 2019 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
During comparison of the HYUNDAI rear component, check the rear housing projection against the space behind the bumper skin because facelift bumpers can retain the same vehicle name with different apertures.
For a repeat order of the right version, compare the bumper corner radius with the product face from more than one viewing angle so left- and right-hand stock cannot be mixed during consolidation.
Frequently Asked Questions
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What should be tested after fitting?
Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Request a Product-Specific Quote
The quotation can include export packing requirements once the required variant and order volume are known.
