92403-3S000 Rear Bumper Light for HYUNDAI Sonata 2011-2013 Left
Primary OE reference: 92403-3S000
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Sonata 2011-2013
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: HYUNDAI
Model: Sonata
Vehicle year: 2011-2013
Fitment evidence: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Optical configuration: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Electrical interface: Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Final alignment: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.
Post-fit check: Reinstall the liner only after the housing is secure and the cable, if fitted, has adequate clearance.
Bulk supply: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Packing reference: The visible face should remain separated from tape, staples and loose hardware throughout transport.
92403-3S000 Rear Bumper Light Overview
This product is listed for HYUNDAI Sonata 2011-2013 at the left rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
On the 2011-2013 Sonata bumper layout, protect the visible surface until the full perimeter gap has been accepted to prevent a visually similar version from sitting proud of the bumper.
Vehicle Fitment and Bumper Interface
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
At the workshop selection stage for Sonata, review the reflector texture and lens colour in neutral workshop light before the packaging and carton marking are finalized.
At the left rear-bumper position, record the approved side and vehicle application for repeat-order identification before inner liners make the rear attachment points difficult to inspect.
Reflector, Lens and Electrical Configuration
Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.
When reviewing the 2011-2013 vehicle, confirm that the cable exit, where fitted, clears the bumper reinforcement so the visible gap remains even after every retaining point is engaged.
For the HYUNDAI Sonata application, confirm that any connector seal remains square when the housing is fully seated so the lens and housing are supported without distortion.
Installation and Functional Check
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
For this Sonata body configuration, use the opposite-side component only as an alignment reference, not as an interchange part so a passive reflector is not confused with an illuminated assembly.
Before approving the Sonata part for packing, compare the outer lens edge with the moulded bumper recess to verify that the photographed configuration matches the vehicle in the workshop.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92403-3S000 |
| Cross-reference numbers | 92403-3S000 |
| Internal item code | HY04004-015 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Sonata |
| Model year | 2011-2013 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.
Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
Before fitting the left unit, inspect the lower valance and nearby exhaust trim for adequate operating clearance to avoid contact with wiring, body edges or hot exhaust components.
While the HYUNDAI bumper opening is accessible, check the rear housing projection against the space behind the bumper skin to keep the optical face level with the surrounding painted surface.
Frequently Asked Questions
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How should the visible lens be packed?
Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Request a Product-Specific Quote
Destination and carton-marking requirements can be included with the vehicle-specific enquiry.
