92405-F2000 Rear Bumper Light for HYUNDAI Elantra 2016 Left
Primary OE reference: 92405-F2000
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Elantra 2016
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2016
Physical comparison: Review the corner radius, edge return and rear fastening points against the original bumper opening.
Lighting function: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Electrical check: Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Installation guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
Post-fit check: After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
Wholesale enquiry: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.
Packing reference: Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
92405-F2000 Rear Bumper Light Overview
This product is listed for HYUNDAI Elantra 2016 at the left rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
For this Elantra body configuration, inspect the lower valance and nearby exhaust trim for adequate operating clearance to avoid contact with wiring, body edges or hot exhaust components.
Model, Year and Side Confirmation
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
Before approving the Elantra part for packing, check the rear housing projection against the space behind the bumper skin to keep the optical face level with the surrounding painted surface.
Before fitting the left unit, compare the bumper corner radius with the product face from more than one viewing angle before any modification is made to the bumper or replacement part.
Reflector Housing and Wiring Details
Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.
While the HYUNDAI bumper opening is accessible, align each locating tab with the matching slot before applying hand pressure before deciding whether original hardware is suitable for reuse.
During comparison of the HYUNDAI rear component, check whether the original component uses a separate retainer or an integral locking tab because facelift bumpers can retain the same vehicle name with different apertures.
Installation Preparation
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Photograph the completed fit for repeat-order records when the vehicle uses an uncommon market specification.
For a repeat order of the left version, verify the fastener direction and the shape of the concealed support frame so left- and right-hand stock cannot be mixed during consolidation.
On the 2016 Elantra bumper layout, protect the visible surface until the full perimeter gap has been accepted so the approved product can be picked consistently in a mixed wholesale order.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92405-F2000 |
| Cross-reference numbers | 92405-F2000 |
| Internal item code | HY04004-007 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2016 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
The visible face should remain separated from tape, staples and loose hardware throughout transport.
At the workshop selection stage for Elantra, review the reflector texture and lens colour in neutral workshop light so hidden brackets are not loaded or bent during installation.
At the left rear-bumper position, record the approved side and vehicle application for repeat-order identification to preserve access for a final electrical test where a lamp circuit is present.
Frequently Asked Questions
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
How should the visible lens be packed?
Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Request a Product-Specific Quote
Provide the expected order quantity to receive a trade-oriented packing and supply proposal.
