92406-H6500 Rear Bumper Light for HYUNDAI Accent 2021 Right
Primary OE reference: 92406-H6500
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Accent 2021
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HYUNDAI
Model: Accent
Vehicle year: 2021
Shape and clips: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Rear visibility role: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Powered-version check: Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Workshop guidance: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
Post-fit check: Once seated, inspect the perimeter gap and verify that the bumper surface remains relaxed rather than distorted.
Quotation details: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
92406-H6500 Rear Bumper Light Overview
This product is listed for HYUNDAI Accent 2021 at the right rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
At the right rear-bumper position, confirm that any connector seal remains square when the housing is fully seated before inner liners make the rear attachment points difficult to inspect.
Application and Rear-Bumper Position
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Production date and regional bumper specification should be reviewed when several near-identical versions are available.
When reviewing the 2021 vehicle, use the opposite-side component only as an alignment reference, not as an interchange part so the visible gap remains even after every retaining point is engaged.
For the HYUNDAI Accent application, compare the outer lens edge with the moulded bumper recess so the lens and housing are supported without distortion.
Optical Face and Connector Review
Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.
For this Accent body configuration, inspect the lower valance and nearby exhaust trim for adequate operating clearance so a passive reflector is not confused with an illuminated assembly.
Before approving the Accent part for packing, check the rear housing projection against the space behind the bumper skin to verify that the photographed configuration matches the vehicle in the workshop.
Workshop Fitting Sequence
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Check the opposite side as a reference for height, angle and edge gap before completing the repair.
Before fitting the right unit, compare the bumper corner radius with the product face from more than one viewing angle to avoid contact with wiring, body edges or hot exhaust components.
While the HYUNDAI bumper opening is accessible, align each locating tab with the matching slot before applying hand pressure to keep the optical face level with the surrounding painted surface.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92406-H6500 |
| Cross-reference numbers | 92406-H6500 |
| Internal item code | HY04004-004 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2021 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
During comparison of the HYUNDAI rear component, check whether the original component uses a separate retainer or an integral locking tab before any modification is made to the bumper or replacement part.
For a repeat order of the right version, verify the fastener direction and the shape of the concealed support frame before deciding whether original hardware is suitable for reuse.
Frequently Asked Questions
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
Request a Product-Specific Quote
The quotation can include export packing requirements once the required variant and order volume are known.
