81490-60040 Rear Bumper Light for TOYOTA Land Cruiser 2007 Right
Primary OE reference: 81490-60040
Product type: Rear Bumper Light
Applicable vehicle: TOYOTA Land Cruiser 2007
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: TOYOTA
Model: Land Cruiser
Vehicle year: 2007
Housing match: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Reflector or lamp role: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Wiring confirmation: Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Mounting sequence: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
Post-fit check: For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.
Purchase information: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Packing reference: Before sealing the carton, compare the packed side and quantity with the buyer’s order line.
81490-60040 Rear Bumper Light Overview
This product is listed for TOYOTA Land Cruiser 2007 at the right rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
For the TOYOTA Land Cruiser application, check the rear housing projection against the space behind the bumper skin so the lens and housing are supported without distortion.
Bumper Opening and Vehicle Match
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
For this Land Cruiser body configuration, compare the bumper corner radius with the product face from more than one viewing angle so a passive reflector is not confused with an illuminated assembly.
Before approving the Land Cruiser part for packing, align each locating tab with the matching slot before applying hand pressure to verify that the photographed configuration matches the vehicle in the workshop.
Lens Construction and Powered Variants
Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.
Before fitting the right unit, check whether the original component uses a separate retainer or an integral locking tab to avoid contact with wiring, body edges or hot exhaust components.
While the TOYOTA bumper opening is accessible, verify the fastener direction and the shape of the concealed support frame to keep the optical face level with the surrounding painted surface.
Mounting and Final Verification
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
During comparison of the TOYOTA rear component, protect the visible surface until the full perimeter gap has been accepted before any modification is made to the bumper or replacement part.
For a repeat order of the right version, review the reflector texture and lens colour in neutral workshop light before deciding whether original hardware is suitable for reuse.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 81490-60040 |
| Cross-reference numbers | 81490-60040 |
| Internal item code | TY04004-040 |
| Vehicle brand | TOYOTA |
| Vehicle model | Land Cruiser |
| Model year | 2007 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.
Before sealing the carton, compare the packed side and quantity with the buyer’s order line.
On the 2007 Land Cruiser bumper layout, record the approved side and vehicle application for repeat-order identification because facelift bumpers can retain the same vehicle name with different apertures.
At the workshop selection stage for Land Cruiser, confirm that the cable exit, where fitted, clears the bumper reinforcement so left- and right-hand stock cannot be mixed during consolidation.
Frequently Asked Questions
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How should the visible lens be packed?
Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Request a Product-Specific Quote
Yongshang Auto can review the pictured configuration before preparing a quantity-based offer.
