33505-T31-H01 Rear Bumper Light for HONDA Civic 2022 Right
Primary OE reference: 33505-T31-H01
Product type: Rear Bumper Light
Applicable vehicle: HONDA Civic 2022
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HONDA
Model: Civic
Vehicle year: 2022
Shape and clips: Confirm that the body sits flush in the bumper aperture and that every guide tab faces the correct direction.
Rear visibility role: This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
Powered-version check: For lamp versions, the connector must lock without force and the harness should route clear of the exhaust and sharp edges.
Workshop guidance: Clean the bumper opening, inspect reusable clips and verify an even edge gap before final fastening.
Selection context: Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
Post-fit check: Verify that bumper movement does not load the lens and that the component remains fully clipped at every corner.
Quotation details: Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
33505-T31-H01 Rear Bumper Light Overview
This product is listed for HONDA Civic 2022 at the right rear-bumper position. Powered variants work with the vehicle harness; non-powered variants depend on the correct reflective lens and mounting angle.
Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
For a repeat order of the right version, align each locating tab with the matching slot before applying hand pressure to keep the optical face level with the surrounding painted surface.
Application and Rear-Bumper Position
Review the corner radius, edge return and rear fastening points against the original bumper opening.
Production date and regional bumper specification should be reviewed when several near-identical versions are available.
On the 2022 Civic bumper layout, check whether the original component uses a separate retainer or an integral locking tab before any modification is made to the bumper or replacement part.
At the workshop selection stage for Civic, verify the fastener direction and the shape of the concealed support frame before deciding whether original hardware is suitable for reuse.
Optical Face and Connector Review
For lamp versions, the connector must lock without force and the harness should route clear of the exhaust and sharp edges.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
At the right rear-bumper position, protect the visible surface until the full perimeter gap has been accepted because facelift bumpers can retain the same vehicle name with different apertures.
When reviewing the 2022 vehicle, review the reflector texture and lens colour in neutral workshop light so left- and right-hand stock cannot be mixed during consolidation.
Workshop Fitting Sequence
Clean the bumper opening, inspect reusable clips and verify an even edge gap before final fastening.
For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.
For the HONDA Civic application, record the approved side and vehicle application for repeat-order identification so the approved product can be picked consistently in a mixed wholesale order.
For this Civic body configuration, confirm that the cable exit, where fitted, clears the bumper reinforcement so hidden brackets are not loaded or bent during installation.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 33505-T31-H01 |
| Cross-reference numbers | 33505-T31-H01 |
| Internal item code | HD04004-035 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2022 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
Before approving the Civic part for packing, confirm that any connector seal remains square when the housing is fully seated to preserve access for a final electrical test where a lamp circuit is present.
Before fitting the right unit, use the opposite-side component only as an alignment reference, not as an interchange part to reduce clip damage during a no-force trial installation.
Frequently Asked Questions
What should be tested after fitting?
Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
Request a Product-Specific Quote
Where the application is uncertain, send bumper-opening and rear-housing photographs for comparison first.
