81910-02120 Rear Bumper Light for TOYOTA Corolla 2014 Left
Primary OE reference: 81910-02120
Product type: Rear Bumper Light
Applicable vehicle: TOYOTA Corolla 2014
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: TOYOTA
Model: Corolla
Vehicle year: 2014
Physical comparison: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.
Lighting function: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Electrical check: Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Installation guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.
Post-fit check: After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
Wholesale enquiry: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Packing reference: Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
81910-02120 Rear Bumper Light Overview
This product is listed for TOYOTA Corolla 2014 at the left rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
During comparison of the TOYOTA rear component, check whether the original component uses a separate retainer or an integral locking tab so a passive reflector is not confused with an illuminated assembly.
Vehicle Fitment and Bumper Interface
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
For a repeat order of the left version, verify the fastener direction and the shape of the concealed support frame to verify that the photographed configuration matches the vehicle in the workshop.
On the 2014 Corolla bumper layout, protect the visible surface until the full perimeter gap has been accepted to avoid contact with wiring, body edges or hot exhaust components.
Reflector, Lens and Electrical Configuration
Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
At the workshop selection stage for Corolla, review the reflector texture and lens colour in neutral workshop light to keep the optical face level with the surrounding painted surface.
At the left rear-bumper position, record the approved side and vehicle application for repeat-order identification before any modification is made to the bumper or replacement part.
Installation and Functional Check
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Photograph the completed fit for repeat-order records when the vehicle uses an uncommon market specification.
When reviewing the 2014 vehicle, confirm that the cable exit, where fitted, clears the bumper reinforcement before deciding whether original hardware is suitable for reuse.
For the TOYOTA Corolla application, confirm that any connector seal remains square when the housing is fully seated because facelift bumpers can retain the same vehicle name with different apertures.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 81910-02120 |
| Cross-reference numbers | 81910-02120 |
| Internal item code | TY04004-002 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2014 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
The visible face should remain separated from tape, staples and loose hardware throughout transport.
For this Corolla body configuration, use the opposite-side component only as an alignment reference, not as an interchange part so left- and right-hand stock cannot be mixed during consolidation.
Before approving the Corolla part for packing, compare the outer lens edge with the moulded bumper recess so the approved product can be picked consistently in a mixed wholesale order.
Frequently Asked Questions
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Request a Product-Specific Quote
A product-specific quotation can be prepared after the vehicle, side and destination are confirmed.
