92402-3W020 Tail Light for KIA Sportage 2011 Left
Primary OE reference: 92402-3W020
Product type: Tail Light
Applicable vehicle: KIA Sportage 2011
Installation position: Rear body / tail lamp opening
Side / orientation: Left
Brand: KIA
Model: Sportage
Vehicle year: 2011
Housing check: Check the rear housing profile and fastener positions before ordering. A correct exterior shape does not guarantee that the hidden mounting geometry is the same.
Electrical interface: Compare the socket layout and cable exit direction with the removed lamp. Lighting technology can differ between trim levels even when the lens shape appears similar.
Installation guidance: Carry out a trial installation before final assembly. Check bracket engagement, wiring clearance, water-sealing surfaces and lamp operation after connection.
Wholesale enquiry: For wholesale enquiries, state the vehicle, production year, installation side, quantity and destination. Photos of the original front and rear faces help distinguish close variants.
92402-3W020 Tail Light Overview
Built for the stated rear-body location, this product record focuses on the physical and electrical details needed to identify the correct lamp version.
The listed application is KIA Sportage 2011, with the lamp positioned on the left side. Use the photographs and specification table together when comparing the removed assembly.
Vehicle Fitment and Lamp Selection
Confirm the body aperture, lamp perimeter and attachment points as a set. This reduces the risk of selecting a market-specific version with a different rear shell.
Confirm the production period and lighting package as well as the vehicle model. Facelift changes, regional equipment and body variants can alter the lens, reflector or fixing arrangement.
Housing, Lens and Electrical Interface
Check connector orientation and terminal arrangement before fitting. Do not assume that halogen and LED versions share the same internal electronics.
Inspect the lens for transport damage before fitting. The rear casing, vents and sealing edges should remain clean so moisture control and body fit are not compromised.
Installation Guidance
Dry-fit the lamp before tightening fasteners. Align the locating pins first, maintain an even body gap and tighten gradually to avoid stressing the lens or mounting ears.
After installation, test the parking light, brake light, turn signal, reversing light and fog-light function where applicable. Verify that no warning message remains on the instrument panel.
Automotive Lighting Product Specifications
| Product type | Tail Light |
|---|---|
| Primary OE reference | 92402-3W020 |
| Cross-reference numbers | 92402-3W020 |
| Internal item code | KA04003-065 |
| Vehicle brand | KIA |
| Vehicle model | Sportage |
| Model year | 2011 |
| Installation position | Rear body / tail lamp opening |
| Side / orientation | Left |
| Selection basis | OE reference, vehicle application and physical comparison |
Wholesale Supply and Packing
Bulk buyers should identify left and right quantities separately and provide the destination market. Original-part photographs are useful where several lighting packages exist.
The lens face, connector area and projecting brackets should be isolated inside the carton. Separate labels for left- and right-hand units help prevent picking errors in mixed shipments.
Frequently Asked Questions
Are bulbs or electronic modules included?
The supply scope follows the product photographs. Ask separately about bulbs, holders, LED drivers, wiring and control modules if they are not clearly shown.
Can a similar-looking lamp be used instead?
Appearance alone is not sufficient. The body opening, housing depth, mounting points, connector and lighting technology must all match.
What should be checked before installation?
Compare the removed lamp with the supplied images, inspect the seal and brackets, confirm the electrical plug and carry out a dry fit before final tightening.
What details are required for a trade quotation?
Provide the vehicle application, production year, installation side, quantity, destination and clear photographs of the original lamp.
Request a Product-Specific Quote
Contact Yongshang Auto with the vehicle details, required side, quantity and destination. The photographed configuration can be reviewed before a wholesale quotation is prepared.
