10544212 Blower Motor for MG
Primary OE reference: 10544212
Cross-reference 1: WQT85B-060A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MG
Brand: MG
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
10544212 Automotive Blower Motor Overview
Use 10544212 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.
For catalogue item 6218-008, Cabin 10544212 airflow depends on the 10544212 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6218-008 when comparing this 10544212 airflow configuration.
OE Reference and Application
The primary catalogue number is 10544212. The recorded application is MG. For 6218-008, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6218-008 with the approved OE reference.
HVAC Interface and 10544212 installation
During work on 6218-008, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6218-008 before the lower trim is closed.
For item 6218-008, confirm that the 10544212 centrifugal wheel clears its housing and that the 6218-008 connector lock engages without force. After seating 6218-008, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6218-008.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 10544212 |
| Cross-reference numbers | WQT85B-060A |
| Vehicle brand | MG |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 10544212 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6218-008, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6218-008 record remains the picking reference.
For trade item 6218-008, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6218-008 on the packing instruction.
Frequently Asked Questions
How should item 6218-008 and blower number 10544212 be verified?
Match 6218-008 to the complete 10544212 marking, then compare the 6218-008 plug, terminal count, mounting flange and wheel dimensions with the removed MG unit.
Can 6218-008 have more than one vehicle-side blower configuration?
Yes. MG production changes can affect 6218-008; confirm steering position, climate-control specification and the original 6218-008 geometry before approval.
What circuit checks are useful when 6218-008 does not operate?
For 6218-008, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6218-008 motor again.
Which details should accompany a wholesale request for 6218-008?
Provide item 6218-008, OE 10544212, the stated application, quantity and destination; add 6218-008 carton or private-label requirements separately.
How can noise be avoided after fitting 6218-008?
Clear debris from the air inlet, check that the 6218-008 wheel turns freely, seat the 6218-008 flange evenly and keep wiring away from the impeller.
Request a quote for 6218-008: Send 10544212, the 6218-008 application and required quantity for a fitment and supply review.
