GW997003 Blower Motor for MERCEDES-BENZ
Primary OE reference: GW997003
Cross-reference 1: 0999062502
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ
Brand: MERCEDES-BENZ
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
GW997003 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use GW997003 together with the GW997003 product images and vehicle data on this page.
For catalogue item 6232-102, the GW997003 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6232-102 when comparing this GW997003 airflow configuration.
OE Reference and Application
The primary catalogue number is GW997003. The recorded application is MERCEDES-BENZ. For 6232-102, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6232-102 with the approved OE reference.
HVAC Interface and GW997003 installation
During work on 6232-102, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6232-102 before the lower trim is closed.
For item 6232-102, confirm that the GW997003 centrifugal wheel clears its housing and that the 6232-102 connector lock engages without force. After seating 6232-102, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-102.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | GW997003 |
| Cross-reference numbers | 0999062502 |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| GW997003 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-102, Packing preparation accounts for the GW997003 motor weight and wheel shape to reduce movement inside the carton. The 6232-102 record remains the picking reference.
For trade item 6232-102, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6232-102 on the packing instruction.
Frequently Asked Questions
How should item 6232-102 and blower number GW997003 be verified?
Match 6232-102 to the complete GW997003 marking, then compare the 6232-102 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6232-102 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6232-102; confirm steering position, climate-control specification and the original 6232-102 geometry before approval.
What circuit checks are useful when 6232-102 does not operate?
For 6232-102, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-102 motor again.
Which details should accompany a wholesale request for 6232-102?
Provide item 6232-102, OE GW997003, the stated application, quantity and destination; add 6232-102 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-102?
Clear debris from the air inlet, check that the 6232-102 wheel turns freely, seat the 6232-102 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-102: Send GW997003, the 6232-102 application and required quantity for a fitment and supply review.
