V30031771 Blower Motor for MERCEDES-BENZ
Primary OE reference: V30031771
Cross-reference 1: A2108206742
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ
Brand: MERCEDES-BENZ
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
V30031771 Automotive Blower Motor Overview
The V30031771 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6232-068, When the climate-control circuit commands V30031771 airflow, the electric motor rotates the V30031771 fan wheel inside the HVAC housing. Use 6232-068 when comparing this V30031771 airflow configuration.
OE Reference and Application
The primary catalogue number is V30031771. The recorded application is MERCEDES-BENZ. For 6232-068, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6232-068 with the approved OE reference.
HVAC Interface and V30031771 installation
During work on 6232-068, If V30031771 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the V30031771 motor is the only cause. Recheck 6232-068 before the lower trim is closed.
For item 6232-068, confirm that the V30031771 centrifugal wheel clears its housing and that the 6232-068 connector lock engages without force. After seating 6232-068, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-068.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | V30031771 |
| Cross-reference numbers | A2108206742 |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| V30031771 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-068, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-068 record remains the picking reference.
For trade item 6232-068, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6232-068 on the packing instruction.
Frequently Asked Questions
How should item 6232-068 and blower number V30031771 be verified?
Match 6232-068 to the complete V30031771 marking, then compare the 6232-068 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6232-068 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6232-068; confirm steering position, climate-control specification and the original 6232-068 geometry before approval.
What circuit checks are useful when 6232-068 does not operate?
For 6232-068, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-068 motor again.
Which details should accompany a wholesale request for 6232-068?
Provide item 6232-068, OE V30031771, the stated application, quantity and destination; add 6232-068 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-068?
Clear debris from the air inlet, check that the 6232-068 wheel turns freely, seat the 6232-068 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-068: Send V30031771, the 6232-068 application and required quantity for a fitment and supply review.
