A1648350207 Blower Motor for MERCEDES-BENZ
Primary OE reference: A1648350207
Cross-reference 1: A1648350407
Cross-reference 2: A1648350607
Cross-reference 3: 982608U006
Cross-reference 4: 7737080601
Cross-reference 5: LP60-221B
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ
Brand: MERCEDES-BENZ
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A1648350207 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use A1648350207 together with the A1648350207 product images and vehicle data on this page.
For catalogue item 6233-067, the A1648350207 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6233-067 when comparing this A1648350207 airflow configuration.
OE Reference and Application
The primary catalogue number is A1648350207. The recorded application is MERCEDES-BENZ. For 6233-067, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6233-067 with the approved OE reference.
HVAC Interface and A1648350207 installation
During work on 6233-067, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6233-067 before the lower trim is closed.
For item 6233-067, confirm that the A1648350207 centrifugal wheel clears its housing and that the 6233-067 connector lock engages without force. After seating 6233-067, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-067.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A1648350207 |
| Cross-reference numbers | A1648350407 / A1648350607 / 982608U006 / 7737080601 / LP60-221B |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| A1648350207 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6233-067, Packing preparation accounts for the A1648350207 motor weight and wheel shape to reduce movement inside the carton. The 6233-067 record remains the picking reference.
For trade item 6233-067, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6233-067 on the packing instruction.
Frequently Asked Questions
How should item 6233-067 and blower number A1648350207 be verified?
Match 6233-067 to the complete A1648350207 marking, then compare the 6233-067 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6233-067 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6233-067; confirm steering position, climate-control specification and the original 6233-067 geometry before approval.
What circuit checks are useful when 6233-067 does not operate?
For 6233-067, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-067 motor again.
Which details should accompany a wholesale request for 6233-067?
Provide item 6233-067, OE A1648350207, the stated application, quantity and destination; add 6233-067 carton or private-label requirements separately.
How can noise be avoided after fitting 6233-067?
Clear debris from the air inlet, check that the 6233-067 wheel turns freely, seat the 6233-067 flange evenly and keep wiring away from the impeller.
Request a quote for 6233-067: Send A1648350207, the 6233-067 application and required quantity for a fitment and supply review.
