272700-5370 Blower Motor for SUZUKI
Primary OE reference: 272700-5370
Cross-reference 1: 272700-5660
Cross-reference 2: 272700-5050
Cross-reference 3: 272700-6170
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUZUKI
Brand: SUZUKI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272700-5370 Automotive Blower Motor Overview
This product entry documents the 272700-5370 blower unit with practical identification and 272700-5370 installation checkpoints.
For catalogue item 6225-019, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 272700-5370 blower important at idle and in traffic. Use 6225-019 when comparing this 272700-5370 airflow configuration.
OE Reference and Application
The primary catalogue number is 272700-5370. The recorded application is SUZUKI. For 6225-019, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6225-019 with the approved OE reference.
HVAC Interface and 272700-5370 installation
During work on 6225-019, After 272700-5370 installation, operate low through high speed and confirm 272700-5370 airflow reaches the selected vents without abnormal vibration. Recheck 6225-019 before the lower trim is closed.
For item 6225-019, confirm that the 272700-5370 centrifugal wheel clears its housing and that the 6225-019 connector lock engages without force. After seating 6225-019, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-019.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272700-5370 |
| Cross-reference numbers | 272700-5660 / 272700-5050 / 272700-6170 |
| Vehicle brand | SUZUKI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 272700-5370 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6225-019, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6225-019 record remains the picking reference.
For trade item 6225-019, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6225-019 on the packing instruction.
Frequently Asked Questions
How should item 6225-019 and blower number 272700-5370 be verified?
Match 6225-019 to the complete 272700-5370 marking, then compare the 6225-019 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.
Can 6225-019 have more than one vehicle-side blower configuration?
Yes. SUZUKI production changes can affect 6225-019; confirm steering position, climate-control specification and the original 6225-019 geometry before approval.
What circuit checks are useful when 6225-019 does not operate?
For 6225-019, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-019 motor again.
Which details should accompany a wholesale request for 6225-019?
Provide item 6225-019, OE 272700-5370, the stated application, quantity and destination; add 6225-019 carton or private-label requirements separately.
How can noise be avoided after fitting 6225-019?
Clear debris from the air inlet, check that the 6225-019 wheel turns freely, seat the 6225-019 flange evenly and keep wiring away from the impeller.
Request a quote for 6225-019: Send 272700-5370, the 6225-019 application and required quantity for a fitment and supply review.
