871041100 Blower Motor for HINO
Primary OE reference: 871041100
Cross-reference 1: 871041080
Cross-reference 2: 162500-5461
Cross-reference 3: 162500-0030
Cross-reference 4: 162500-5460
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HINO
Brand: HINO
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
871041100 Automotive Blower Motor Overview
Reference 871041100 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6260-001, the 871041100 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6260-001 when comparing this 871041100 airflow configuration.
OE Reference and Application
The primary catalogue number is 871041100. The recorded application is HINO. For 6260-001, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6260-001 with the approved OE reference.
HVAC Interface and 871041100 installation
During work on 6260-001, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6260-001 before the lower trim is closed.
For item 6260-001, confirm that the 871041100 centrifugal wheel clears its housing and that the 6260-001 connector lock engages without force. After seating 6260-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6260-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 871041100 |
| Cross-reference numbers | 871041080 / 162500-5461 / 162500-0030 / 162500-5460 |
| Vehicle brand | HINO |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 871041100 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6260-001, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6260-001 record remains the picking reference.
For trade item 6260-001, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6260-001 on the packing instruction.
Frequently Asked Questions
How should item 6260-001 and blower number 871041100 be verified?
Match 6260-001 to the complete 871041100 marking, then compare the 6260-001 plug, terminal count, mounting flange and wheel dimensions with the removed HINO unit.
Can 6260-001 have more than one vehicle-side blower configuration?
Yes. HINO production changes can affect 6260-001; confirm steering position, climate-control specification and the original 6260-001 geometry before approval.
What circuit checks are useful when 6260-001 does not operate?
For 6260-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6260-001 motor again.
Which details should accompany a wholesale request for 6260-001?
Provide item 6260-001, OE 871041100, the stated application, quantity and destination; add 6260-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6260-001?
Clear debris from the air inlet, check that the 6260-001 wheel turns freely, seat the 6260-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6260-001: Send 871041100, the 6260-001 application and required quantity for a fitment and supply review.
