A2128200808 Blower Motor for AUDI
Primary OE reference: A2128200808
Cross-reference 1: 2128200808
Cross-reference 2: KM451
Cross-reference 3: 2811010
Cross-reference 4: 8EW351043111
Cross-reference 5: 34238
Product type: Automotive HVAC Blower Motor
Applicable vehicle: AUDI
Brand: AUDI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A2128200808 Automotive Blower Motor Overview
Reference A2128200808 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6233-058, the A2128200808 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6233-058 when comparing this A2128200808 airflow configuration.
OE Reference and Application
The primary catalogue number is A2128200808. The recorded application is AUDI. For 6233-058, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6233-058 with the approved OE reference.
HVAC Interface and A2128200808 installation
During work on 6233-058, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6233-058 before the lower trim is closed.
For item 6233-058, confirm that the A2128200808 centrifugal wheel clears its housing and that the 6233-058 connector lock engages without force. After seating 6233-058, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-058.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A2128200808 |
| Cross-reference numbers | 2128200808 / KM451 / 2811010 / 8EW351043111 / 34238 |
| Vehicle brand | AUDI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| A2128200808 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6233-058, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6233-058 record remains the picking reference.
For trade item 6233-058, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6233-058 on the packing instruction.
Frequently Asked Questions
How should item 6233-058 and blower number A2128200808 be verified?
Match 6233-058 to the complete A2128200808 marking, then compare the 6233-058 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.
Can 6233-058 have more than one vehicle-side blower configuration?
Yes. AUDI production changes can affect 6233-058; confirm steering position, climate-control specification and the original 6233-058 geometry before approval.
What circuit checks are useful when 6233-058 does not operate?
For 6233-058, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-058 motor again.
Which details should accompany a wholesale request for 6233-058?
Provide item 6233-058, OE A2128200808, the stated application, quantity and destination; add 6233-058 carton or private-label requirements separately.
How can noise be avoided after fitting 6233-058?
Clear debris from the air inlet, check that the 6233-058 wheel turns freely, seat the 6233-058 flange evenly and keep wiring away from the impeller.
Request a quote for 6233-058: Send A2128200808, the 6233-058 application and required quantity for a fitment and supply review.
