8103131SL014 Blower Motor for PEUGEOT
Primary OE reference: 8103131SL014
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT
Brand: PEUGEOT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8103131SL014 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 8103131SL014 together with the 8103131SL014 product images and vehicle data on this page.
For catalogue item 6204-112, the 8103131SL014 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6204-112 when comparing this 8103131SL014 airflow configuration.
OE Reference and Application
The primary catalogue number is 8103131SL014. The recorded application is PEUGEOT. For 6204-112, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6204-112 with the approved OE reference.
HVAC Interface and 8103131SL014 installation
During work on 6204-112, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6204-112 before the lower trim is closed.
For item 6204-112, confirm that the 8103131SL014 centrifugal wheel clears its housing and that the 6204-112 connector lock engages without force. After seating 6204-112, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-112.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8103131SL014 |
| Cross-reference numbers | 8103131SL014 |
| Vehicle brand | PEUGEOT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 8103131SL014 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-112, Packing preparation accounts for the 8103131SL014 motor weight and wheel shape to reduce movement inside the carton. The 6204-112 record remains the picking reference.
For trade item 6204-112, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6204-112 on the packing instruction.
Frequently Asked Questions
How should item 6204-112 and blower number 8103131SL014 be verified?
Match 6204-112 to the complete 8103131SL014 marking, then compare the 6204-112 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-112 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-112; confirm steering position, climate-control specification and the original 6204-112 geometry before approval.
What circuit checks are useful when 6204-112 does not operate?
For 6204-112, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-112 motor again.
Which details should accompany a wholesale request for 6204-112?
Provide item 6204-112, OE 8103131SL014, the stated application, quantity and destination; add 6204-112 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-112?
Clear debris from the air inlet, check that the 6204-112 wheel turns freely, seat the 6204-112 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-112: Send 8103131SL014, the 6204-112 application and required quantity for a fitment and supply review.
