12100018 Blower Motor for NISSAN
Primary OE reference: 12100018
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
12100018 Automotive Blower Motor Overview
The 12100018 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-127, When the climate-control circuit commands 12100018 airflow, the electric motor rotates the 12100018 fan wheel inside the HVAC housing. Use 6205-127 when comparing this 12100018 airflow configuration.
OE Reference and Application
The primary catalogue number is 12100018. The recorded application is NISSAN. For 6205-127, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-127 with the approved OE reference.
HVAC Interface and 12100018 installation
During work on 6205-127, If 12100018 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 12100018 motor is the only cause. Recheck 6205-127 before the lower trim is closed.
For item 6205-127, confirm that the 12100018 centrifugal wheel clears its housing and that the 6205-127 connector lock engages without force. After seating 6205-127, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-127.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 12100018 |
| Cross-reference numbers | 12100018 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 12100018 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-127, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-127 record remains the picking reference.
For trade item 6205-127, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-127 on the packing instruction.
Frequently Asked Questions
How should item 6205-127 and blower number 12100018 be verified?
Match 6205-127 to the complete 12100018 marking, then compare the 6205-127 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-127 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-127; confirm steering position, climate-control specification and the original 6205-127 geometry before approval.
What circuit checks are useful when 6205-127 does not operate?
For 6205-127, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-127 motor again.
Which details should accompany a wholesale request for 6205-127?
Provide item 6205-127, OE 12100018, the stated application, quantity and destination; add 6205-127 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-127?
Clear debris from the air inlet, check that the 6205-127 wheel turns freely, seat the 6205-127 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-127: Send 12100018, the 6205-127 application and required quantity for a fitment and supply review.
